Northstar Throttle Body kits for 96-99 M90
Thread Starter
Junior Member
Posts like a Ricer Type-R
Joined: Feb 2006
Posts: 14
Likes: 0
From: Warren, NJ
Northstar Throttle Body kits for 96-99 M90
Time is running out on the preorder and i want to make sure everyone has a chance if they want one. if you go to the vendor section there is a post with all the information for buying a kit and the options
Thread Starter
Junior Member
Posts like a Ricer Type-R
Joined: Feb 2006
Posts: 14
Likes: 0
From: Warren, NJ
the straight through plate is meant for ported M90s. the plate is 75mm. the tapered plate is 75 to 72 mm which is the TB to the stock inlet
the northstar MAF is similar to the 96-98 L67 sensor.
Putting the MAF tables into the PCM is better then using a power tuner or mini AFC will be required to tune it up just right.
I have had alot of success using the LQ4 MAF and table and using the N* MAF witha mini AFC.
the northstar MAF is similar to the 96-98 L67 sensor.
Putting the MAF tables into the PCM is better then using a power tuner or mini AFC will be required to tune it up just right.
I have had alot of success using the LQ4 MAF and table and using the N* MAF witha mini AFC.
Thread Starter
Junior Member
Posts like a Ricer Type-R
Joined: Feb 2006
Posts: 14
Likes: 0
From: Warren, NJ
http://www.bonnevilleclub.com/forum/...ic.php?t=48336
this is the link to the other thread. the preorder is only going to be about 14 more days
this is the link to the other thread. the preorder is only going to be about 14 more days
Thread
Thread Starter
Forum
Replies
Last Post
gxpwoot
Bonneville GXP/ Northstar Powered Cars
4
Dec 17, 2005 02:36 PM
DeeGee96SE
Performance, Brainstorming & Tuning
5
Jun 29, 2004 12:21 AM