Need to know what the stock fuel pressure is on the series 1 SSEI.

I plan to add a fuel cell to the NOSzle system to add 100 octane fuel rather than the 93 I currently run in the tank. So I got a 5 gallon foam filled cell and want to match the pressure of the stock system. Most of the electric pumps from Holley come in either 7 or 14 psi.

Does anyone know??

Steve

Are you going to have a switch to switch from the tank to the cell?

Someone correct me if I am wrong, but the 7psi system is more for carberated engines which need a lower fuel pressure. 14 is probably what you need.

at the fuel rail is 41 to 47 PSI

Thanks.

No Switch needed, The injectors will use the 93 and the NOSzles will use the 100 octane.

I'll go with the 45 psi unit..

Steve

Wow....let me see if I understand you correctly. You're going to inject 100 octane FUEL into the intake plenum/TB?

I was under the impression the NOSzzle system was a direct port system. Jeffrey was gonna get it till he got his venom.

Will,

Yeah the NOSzle setup is a direct port system, so the additional fuel goes in under the Injectors.

Steve