Need some help.
Thread Starter
Junior Member
Posts like a Ricer Type-R
Joined: Aug 2002
Posts: 11
Likes: 13
Ok, I'm building up the test model. It should be complete in about 3 or 4 hours (6 or 7 beers). Working the kinks out before I produce the 2 'final' pieces.
You WILL need power tools at your disposal to do this, otherwise it will get spendy. I still need verification on the bumper cover/airdams for the models listed.
So far, I KNOW it will work for:
92-95 SSE
92-95 SSEi
96-99 SSE
96-99 SSEi
98-99 SLE
I'm unsure about:
96-99 SE
96-97 SLE
92-95 SLE
I know the following WON'T work:
92-95 SE
You WILL need power tools at your disposal to do this, otherwise it will get spendy. I still need verification on the bumper cover/airdams for the models listed.
So far, I KNOW it will work for:
92-95 SSE
92-95 SSEi
96-99 SSE
96-99 SSEi
98-99 SLE
I'm unsure about:
96-99 SE
96-97 SLE
92-95 SLE
I know the following WON'T work:
92-95 SE
Junior Member
Joined: Feb 2004
Posts: 7
Likes: 0
From: Silver spring
Re: Need some help.
Originally Posted by willwren
I need pictures from the following cars:
92-95 SE or SLE
96-99 SE or SLE
96-99 SSE or SSEi
The picture needs to be of the UNDER side of the front airdam of the surface that faces the street. Between the front plate and the outside edge....in other words, the lower part of the airdam below the fogs, looking UP from the street.
92-95 SE or SLE
96-99 SE or SLE
96-99 SSE or SSEi
The picture needs to be of the UNDER side of the front airdam of the surface that faces the street. Between the front plate and the outside edge....in other words, the lower part of the airdam below the fogs, looking UP from the street.
Thread Starter
Junior Member
Posts like a Ricer Type-R
Joined: Aug 2002
Posts: 11
Likes: 13
Yessir, it most squirtanly is! 
I've been working on this FOREVER. Soon, folks, very soon. Thanks for the help to everyone so far. Keep it up. I'd like to have this hashed out by the time the work is done.
I've been working on this FOREVER. Soon, folks, very soon. Thanks for the help to everyone so far. Keep it up. I'd like to have this hashed out by the time the work is done.
Thread Starter
Junior Member
Posts like a Ricer Type-R
Joined: Aug 2002
Posts: 11
Likes: 13
You're hosed. The mounting location this is designed for won't work on that front bumper. You'll need to create some form of custom bracket, but this may be an advantage to you, as it won't be so low to the ground.
Contact Damemorder for details. I'll leave it to you two guys to pick this end of the project up. I want this to work for all models and trim levels.
Contact Damemorder for details. I'll leave it to you two guys to pick this end of the project up. I want this to work for all models and trim levels.