Manifold Painted Pics! FINISHED!!! sorta
#21
Senior Member
True Car Nut
Originally Posted by CmptrNerd
And here it is so far:
Thinking about another coat when it dries.
Thinking about another coat when it dries.
#22
Senior Member
Posts like a Camaro
Thread Starter
Join Date: Jul 2004
Location: Manassas, Virginia NOVA
Posts: 827
Likes: 0
Received 0 Likes
on
0 Posts
Thanks! Im hoping to get it installed today and then I may take some pics but I'll probably clean the engine first and then get some shotz goin.
#23
Senior Member
Posts like a Camaro
Thread Starter
Join Date: Jul 2004
Location: Manassas, Virginia NOVA
Posts: 827
Likes: 0
Received 0 Likes
on
0 Posts
There she is all done with the TB mounted. The "tubes" are definitely wider than the stock manifold and Im hoping it will bring in more air. Is this true? They are very noticeably thicker.
#24
Senior Member
True Car Nut
That looks pretty nice. I don't know how your new unit compares to the stock mani, but FYI the "tube" things are called runners. Post a pic after you get it mounted up. It should look really good.
#28
Senior Member
Posts like a Camaro
Thread Starter
Join Date: Jul 2004
Location: Manassas, Virginia NOVA
Posts: 827
Likes: 0
Received 0 Likes
on
0 Posts
Well ok the exterior runners are slightly wider than the OEM runners. I bought this at napa auto parts and its an aftermarket UIM so its just a bit different than the GM one but the layout is exactly the same because I checked and well they looked it up in the PC when they ordered it. The whole manifold looks beefier. I'll take a shot of both next to eachother so you can maybe see what Im talking about.
#29
Senior Member
Posts like a Camaro
Thread Starter
Join Date: Jul 2004
Location: Manassas, Virginia NOVA
Posts: 827
Likes: 0
Received 0 Likes
on
0 Posts
Its a little hard to tell but you can obviously see a difference in design in the runners. It isnt the paint that makes them look wider either because I compared the two before I painted it.