as the years go by with n/a 3.8'* i am thinking of jumping on a park ave in the next year or sooner

and this could also help new owners

ok what mods would i need to run a 3.2 pulley

whats the difference in boost between a 3.4 and a 3.2
what does porting a */c do?

could some one help me understand the basic tuning of a */c 3.8

look at my sig, I still have minor KR with the 3.2

you will probably get about 1-2 psi more with the 3.2 than the 3.4

porting a SC makes it more efficient by making it able to handle more air, and do it cooler.

You'll probably want to start off with a 3.5mps and go smaller once you have more extensive mods. Even at that, with a 3.5, you'll want to have a CAI, preferably a FWI, as well as a 180* t-stat.
Before you go smaller, it would be best to get get a high-flow cat, and a PCM.You can run a 3.4 without either, but you will most likely get a lot of KR.