Knight Fire Scan Results in XLS Format..... Right Click... Save Target As....

I've also added in a column for "duty cycle" on the far right.....
Using the formula ((IPW*RPM)/1200)=Duty Cycle

These scans were taken with an Alex Pepper scanner.

Anyone have any input?

Too rich and not enough timing advance.

Please post a scan with the following parameters logged. I'd like to see WOT from a standing start into 3rd gear and another in 3rd gear rolling onto the throttle with TPS % from 20 to 35% and speed should start in the range of 48 to 64 MPH.

STFT
LTFT
MPH
RPM
Gear
TPS (%)
O2
KR
MAP (Kpa)
MAF (Hz)

Let us know...it'* time to start tweaking on your own.

Cheers,

Foghorn.... here'* the data you requested.....
I disconnected the mini AFC for these runs.....

Let me know if you need more data.....

Re do the second run, first WOT was good. I need to see all the values as you progressively step on it from 48 MPH+. I need to see all the TPS % values between about 20% and 35%, I need to see what'* happening just before you go into PE Mode.

Let me know if you need an example.

Cheers,

Redo the run from 48mph to what? 100mph?
What'* PE mode?

From 48 MPH to about 70 is sufficient. Maybe even lower speed will do, speed is not really what I want to see, it'* the TPS values at 20 to 35% in 3 rd gear.

PE = Power Enrichment mode

Cheers,

Ok... try this one.... hope it helps......

http://rubix.ca/Bonnie/97SSEi/48100.xls

Good...that helps. Now tell me what program you're running in the PCM; Intense, DHP or whatever...better yet, read the file, save it as a BIN file and send it to me.

Cheers,