Jet power control module for the 1996 Bonne
#12
Senior Member
Posts like a Northstar
Join Date: Sep 2002
Location: Chandler, Arizona 96 RED SSEi
Posts: 747
Likes: 0
Received 0 Likes
on
0 Posts
No Bonneville listed. Superdve said he'd do a custom burn for me because he'* got one on his 96. I told him thanks but no thanks in part because I don't have any other mods nor plan to do any major mods in the near future.
#13
Senior Member
True Car Nut
Join Date: May 2002
Location: Edmonton, AB Canada
Posts: 2,621
Likes: 0
Received 0 Likes
on
0 Posts
Re: Jet power control module for the 1996 Bonne
Originally Posted by merlin
Originally Posted by DeathRat
I sell these too if you need one.
These Jet PCMs will NOT effect anything else like speed limiter, shift points, etc. A "Custom" burned PCM will be needed to change that.
#14
Senior Member
Posts like a Supercharger
Thread Starter
Join Date: May 2003
Location: Sherwood Park, Alberta
Posts: 188
Likes: 0
Received 0 Likes
on
0 Posts
Will, if you use the link on my posting and click on 1996 models, it shows a Bonneville part # 68003. I will have to talk to Superdave about a custom burn, if one can be done. That seems like a better option. Dr. Jay, find that link!!!
#15
Junior Member
Posts like a Ricer Type-R
Not sure if it will matter to Superdave, but you don't have the 4T65 trans. I believe most of his burns are for that, which would be 97 and up. If you get confirmation, let us know.
#16
Senior Member
True Car Nut
Join Date: Dec 2002
Location: Halifax, Canada 91SSE / 97SSEi
Posts: 5,857
Likes: 0
Received 0 Likes
on
0 Posts
Does anyone here in the club do custom burns for PCMs?
Deathrat, or what about Intense or ADTR?
I don't believe that Jetchip & HyperChip make any chips for the 96-99 Bonnevilles.
Deathrat, or what about Intense or ADTR?
I don't believe that Jetchip & HyperChip make any chips for the 96-99 Bonnevilles.
#17
Senior Member
True Car Nut
Join Date: Jan 2003
Location: Bloomington-Normal, IL 1997 SE
Posts: 3,734
Likes: 0
Received 0 Likes
on
0 Posts
with that PCM dont you have to rig a switch to turn it on after the car is started otherwise it throws a code? where does it plug into the car?
#18
Senior Member
True Car Nut
Join Date: May 2002
Location: Edmonton, AB Canada
Posts: 2,621
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Merlin 91/97
Does anyone here in the club do custom burns for PCMs?
Deathrat, or what about Intense or ADTR?
I don't believe that Jetchip & HyperChip make any chips for the 96-99 Bonnevilles.
Deathrat, or what about Intense or ADTR?
I don't believe that Jetchip & HyperChip make any chips for the 96-99 Bonnevilles.
http://www.bonnevilleattitude.com/st...f6f48aa61f7ad5
Because the 96+ cars use a PCM not an ECU that has a chip in it.
For a "custom" burned PCM, I can get you one through Ty @ DP.
Thread
Thread Starter
Forum
Replies
Last Post
2000BLKBONNEVILLE
Everything Electrical & Electronic
0
09-10-2009 12:43 PM
BonneMeMN
Performance, Brainstorming & Tuning
22
05-10-2004 03:19 PM