Jeez, my mod bug is really alive the past few days
#1
Senior Member
True Car Nut
Thread Starter
Join Date: Dec 2002
Location: Sauk Centre, MN
Posts: 5,459
Likes: 0
Received 0 Likes
on
0 Posts
Jeez, my mod bug is really alive the past few days
power log
under drive WP pulley -bought new one since the used one I was going to buy from ZZP was already sold.
Magnaflow 12267 muffler
Magnaflow 94109 cat
4" inlet 9" long K&N cone
Now I have to get some 4" tubing from Intense.
under drive WP pulley -bought new one since the used one I was going to buy from ZZP was already sold.
Magnaflow 12267 muffler
Magnaflow 94109 cat
4" inlet 9" long K&N cone
Now I have to get some 4" tubing from Intense.
#4
Senior Member
True Car Nut
Thread Starter
Join Date: Dec 2002
Location: Sauk Centre, MN
Posts: 5,459
Likes: 0
Received 0 Likes
on
0 Posts
I realize there is is goingto be some fun with the P-log, but probably not until spring. I have better plans for then, including the PT.
But for now I have a set of mani'* incoming for some Nickel-plating (thanks to my brother-in-law who welds frames for one of the biggest trailers manufacter'* in MN), and some true port work.
I hope to get the PT around April/May and will see what I can do then for tuning, based off what I learn from studying upon tuning and other peoples (those who have adjusted best to it) experiences with the power-log. :?
At least it should be better than a ported front manifold.
But for now I have a set of mani'* incoming for some Nickel-plating (thanks to my brother-in-law who welds frames for one of the biggest trailers manufacter'* in MN), and some true port work.
I hope to get the PT around April/May and will see what I can do then for tuning, based off what I learn from studying upon tuning and other peoples (those who have adjusted best to it) experiences with the power-log. :?
At least it should be better than a ported front manifold.
#5
Senior Member
True Car Nut
Thread Starter
Join Date: Dec 2002
Location: Sauk Centre, MN
Posts: 5,459
Likes: 0
Received 0 Likes
on
0 Posts
Bug was hungry again today.
K&N RE-0920 off ebay $36 shipped
Intense 3.5" smooth bellows intake tubing (2 ft) $23.98 Shipped
Intense Blue/Silver Windshield banner $9.99 Shipped
Now I just have to return the 4"x6-1/4"x9" K&N. :? Want to keep this, but it probably is a little over sized for my lightly ported TB.
I the way it looks my cousin may end up buying my I-win Engineering rockers and pedestals and I will probably end up getting some Yella Terra or ZZP Aluminum 1.9'* in the February or March.
K&N RE-0920 off ebay $36 shipped
Intense 3.5" smooth bellows intake tubing (2 ft) $23.98 Shipped
Intense Blue/Silver Windshield banner $9.99 Shipped
Now I just have to return the 4"x6-1/4"x9" K&N. :? Want to keep this, but it probably is a little over sized for my lightly ported TB.
I the way it looks my cousin may end up buying my I-win Engineering rockers and pedestals and I will probably end up getting some Yella Terra or ZZP Aluminum 1.9'* in the February or March.
#6
Senior Member
Posts like a Supercharger
Join Date: Aug 2006
Location: Minnesnowda....
Posts: 198
Likes: 0
Received 0 Likes
on
0 Posts
I've got the same thing going right now, I'm leaving in a month for A.I.T. and I want to get as much as possible done before I leave (exhaust, porting and polishing if you would set a date marty..... start guilt trip... now ) That and I have big plans for when I come back. (around may)
Thread
Thread Starter
Forum
Replies
Last Post
BonneAlien
Your Ride: GM Pictures & Videos
14
09-09-2004 11:01 AM