intake sound
Guest
Posts: n/a
i wish i had a recording of mine, in nov at the track , people cam up to me and asked me what the screaming whistle was when i nailed it, the could hear the SC/intake scream in the stands 
but i was shifting at 5800 rpms and with the 2" pulley, it spins the SC at 19,100 rpms @ 5500 rpms crank speed 
but i was shifting at 5800 rpms and with the 2" pulley, it spins the SC at 19,100 rpms @ 5500 rpms crank speed
Junior Member
Posts like a Ricer Type-R
Joined: Aug 2002
Posts: 11
Likes: 13
Senior Member
Posts like a Turbo
Joined: Sep 2002
Posts: 438
Likes: 0
From: B.C. , Canada
Will nice whining sound ....... 
i gotta make a sound byte like that with the blow-off valve going woooosh 
...we both should look into getting the dog-bone upper motor mounts on ours lol keep em` from twisting too far 
i gotta make a sound byte like that with the blow-off valve going woooosh ...we both should look into getting the dog-bone upper motor mounts on ours lol keep em` from twisting too far
Junior Member
Posts like a Ricer Type-R
Joined: Aug 2002
Posts: 11
Likes: 13
And stronger CV shafts 
Any cars out there with an adaptable dogbone, Turtle?
BTW.....I found alot of damage to my front lisence bracket/frame.....and it'* never been hit. It looks like stress cracks, and the only thing I can think of is wind resistance at high speed. Are you running a front plate?
Any cars out there with an adaptable dogbone, Turtle?BTW.....I found alot of damage to my front lisence bracket/frame.....and it'* never been hit. It looks like stress cracks, and the only thing I can think of is wind resistance at high speed. Are you running a front plate?