If you swap 96 engine in 95, PCM issue?
01-28-2012, 02:43 PM
#1
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Dec 2006
Location: Sterling Heights, Michigan
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
If you swap 96 engine in 95, PCM issue?
Hello all,
I had a mechanic swap a 96 engine into my 95 Bonneville SSE.
It ran great for a while and not it is doing all of the things that point to PCM failure.
Do you replace with the PCH for the 95 or for the 96?
Thanks for all your help.
Dan
I had a mechanic swap a 96 engine into my 95 Bonneville SSE.
It ran great for a while and not it is doing all of the things that point to PCM failure.
Do you replace with the PCH for the 95 or for the 96?
Thanks for all your help.
Dan
01-28-2012, 02:45 PM
#2
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Dec 2006
Location: Sterling Heights, Michigan
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
wow, bad typing ignore previous post
Hello all,
I had a mechanic swap a 96 engine into my 95 Bonneville SSE.
It ran great for a while and now it is doing all of the things that point to PCM failure.
Do you replace with the PCM for the 95 with one for the 96?
Thanks for all your help.
Dan
I had a mechanic swap a 96 engine into my 95 Bonneville SSE.
It ran great for a while and now it is doing all of the things that point to PCM failure.
Do you replace with the PCM for the 95 with one for the 96?
Thanks for all your help.
Dan
01-31-2012, 09:38 AM
#4
Senior Member
True Car Nut
Join Date: Feb 2003
Location: Philly
Posts: 4,508
Likes: 0
Received 0 Likes
on
0 Posts
96+ is OBD2 and completely different as far as pcms go.
Any 96+L36 will swap into your 95 n/a SSE correctly if you swap the following from your 95 onto the donor:
knock sensors
coolant temp sensor
oil level sensor
engine harness
PCV cap
rear exhaust manifold
throttle body with sensors
Vac stuff
Any 96+L36 will swap into your 95 n/a SSE correctly if you swap the following from your 95 onto the donor:
knock sensors
coolant temp sensor
oil level sensor
engine harness
PCV cap
rear exhaust manifold
throttle body with sensors
Vac stuff
Thread
Thread Starter
Forum
Replies
Last Post
FieroGT3800
Performance, Brainstorming & Tuning
6
08-24-2004 11:17 PM