OK while the cars were parked next to each other in the garage, i got to thinking about the issues with installing intakes on the 92-94 SSE/SSEi'* with the HL washers....as i Looked over at a 97 washer bottle it struck me...instead of using the 92-96 washer, why not use the 97+???. the 97 has a design that is shorter and wraps aorund the Strut Tower

the 97+ will give you much more room and it mounts in stock locations

comments??

pictures?

Will it fit with the compressor in the '92-'95 location?

The 97-99 bottles will fit much better and have plenty of room for the compressor. Only downside I see is loosing the washer ability for headlights. However with a little ingenuity we could use one pump for both.

that can be done tonight

Tap the bottom of the tank and run the pump inline.

Who has problems with intake setups?

I retained my OEM double tank and HL washers no problem.

I think he is talking about non rice pipe users.

I know that it was a squeeze trying to get my CAI to fit well but I'm also prob. running the biggest CAI box, filter, and intake tube on a '92-'99.

correct, and Willwren you dont have the heatshield totally sealed on all sides (not that there is anything wrong with that) but for ppl like me who did a totally enclosed box, its just an option

I could very well seal it entirely if I needed to in it'* current configuration.

Trim the end of your rice pipe at a slight angle at the TB, and you won't impact.

I trimmed my silicone reducer for the ADTR pipe to fit perfectly where I wanted it.