Ok tough decision. PEM's or Headers?
#1
Senior Member
Posts like a Northstar
Thread Starter
Join Date: Apr 2005
Posts: 778
Likes: 0
Received 0 Likes
on
0 Posts
Ok tough decision. PEM'* or Headers?
Alright with my paycheck tommorow I will have enough to get some Ported Exhaust Manifolds.
Should I get those or be patient and get headers?
http://www.zzperformance.com/product...4cc04dd2a1d4c5
These should work right?
What are the horsepower gain differences? PEMS Vs headers?
Should I get those or be patient and get headers?
http://www.zzperformance.com/product...4cc04dd2a1d4c5
These should work right?
What are the horsepower gain differences? PEMS Vs headers?
#3
Senior Member
Posts like a Northstar
Thread Starter
Join Date: Apr 2005
Posts: 778
Likes: 0
Received 0 Likes
on
0 Posts
Well
I was going for a $1500 budget
But Damn you guys. Now I want to be in the 14'* or maybe even the 13'*. Fast Bonnevilles are cool
So I dont care what I spend now.
I was going for a $1500 budget
But Damn you guys. Now I want to be in the 14'* or maybe even the 13'*. Fast Bonnevilles are cool
So I dont care what I spend now.
#5
Originally Posted by 95naSTA
If your shooting for 13'* your going to need headers. If 14'* is good enough for you then don't waste 100'* more on headers.
#6
Senior Member
Posts like a Northstar
Join Date: Jun 2004
Posts: 555
Likes: 0
Received 0 Likes
on
0 Posts
i hear you all and you all say don't get the headers unless you will use it.
what you are forgetting to add is . . .
Once you get the performance modding bug, you won't be able to stop very easy. sure, sure, it all starts innocent enough . . .
i'll just get the CAI/FWI and the chip
a few months pass - okay now i am ready for the rockers. After all, i heard you can use stock manifolds with those.
then you are wishing you had more, and more, and more . . .
ask around there are a few of us who are hooked and desprately scrounging pennies and planning our next "best" mod.
Go with the Headers and you won't be sorry! i am, Hey look i just found another penny! only 69,999 more to go!
what you are forgetting to add is . . .
Once you get the performance modding bug, you won't be able to stop very easy. sure, sure, it all starts innocent enough . . .
i'll just get the CAI/FWI and the chip
a few months pass - okay now i am ready for the rockers. After all, i heard you can use stock manifolds with those.
then you are wishing you had more, and more, and more . . .
ask around there are a few of us who are hooked and desprately scrounging pennies and planning our next "best" mod.
Go with the Headers and you won't be sorry! i am, Hey look i just found another penny! only 69,999 more to go!
#7
Senior Member
Posts like a Northstar
Thread Starter
Join Date: Apr 2005
Posts: 778
Likes: 0
Received 0 Likes
on
0 Posts
Yeah man
All I was going to do was exhaust and intake.
Now Im going for a 13 second car.
For god sakes I took out my rear steel bumber beam support to save a lousy 25 pounds.
Im sure glad I found this forum
All I was going to do was exhaust and intake.
Now Im going for a 13 second car.
For god sakes I took out my rear steel bumber beam support to save a lousy 25 pounds.
Im sure glad I found this forum
#9
Like everyone said above, if you are very serious about modding, go with the headers. They flow much better.
However, the bang for the buck you get with PEM'* are great. I am very happy with my Pector PEM'*. They are top notch.
However, the bang for the buck you get with PEM'* are great. I am very happy with my Pector PEM'*. They are top notch.