And the PEM'* wouldnt benefit a series 1. They are pretty free flowing stock and there is nothing to port on them. I believe they are port matched and have tubular collectors.

Thank you for the feedback.

so.......... how much should i expect to pay since it seems 600 is too much

you could probably get a brandnew GM SLE/SSEI exhaust for that price

[quote="1993 SLE"]you could probably get a brandnew GM SLE/SSEI exhaust for that price[/quote}

ok you guys are useless today...

Don't pay more than $300 in parts. You won't need to.

Installation may put you over. 95nasta has the estimates, 50-70 for cat, same for muffler, however that'* on eBay, easily $400-$500 if you bought from jegs or summit.


-justin

If you want an estimate, do it yourself. No one on here that i know of works at an exhaust shop.
Measure the amount of straight pipe you have, count the bends, and find the amount for that material. Then estimate 30 to 45 bucks for 2 welds.
It'* 36 bucks for 5 foot of straight stainless:
http://cgi.ebay.com/ebaymotors/ws/eB...980040647&rd=1
Heres a 90* bend:
http://cgi.ebay.com/ebaymotors/ws/eB...sPageName=WDVW
Some cats:
http://motors.search.ebay.com/magnaf...trypageZsearch
Some mufflers:
http://motors.search.ebay.com/magnaf...fsopZ1QQfsooZ1

OR you can do the easy/most cost effective thing and find a stainless 2.5" 2k+ exhuast at a wrecker.

im really just wondering what people are paying out there for similar set-ups

You can also get a great deal from:

www.justmagnaflow.com

lets bump this up and see if i can get an answer