Energy Suspension Endlinks for a 2000+ SSEi

Reply Subscribe

Thread Tools

Search this Thread

Sep 3, 2007 | 07:05 PM

Hans

Thread Starter

Senior Member

True Car Nut

Joined: Jul 2004

Posts: 7,545

Likes: 1

From: Twin Falls, Idaho

Energy Suspension Endlinks for a 2000+ SSEi

Does anyone know the front and rear part numbers I should get for a 2000+ SSEi?

Sep 4, 2007 | 11:38 AM

lash

Senior Member

True Car Nut

Joined: Oct 2005

Posts: 7,030

Likes: 2

From: Central Florida

Since the newer cars are not listed on the Energy Suspension site, your best bet is to measure the ones you have and then order the part number(*) you need with that info. Here'* the link to ES site and P/N listings:
http://www.energysuspension.com/pages/endl.html

And here'* the info, in text format (pictures and charts on site)

Quote:

TO FIT / SELECT THE PROPER SET-
Vehicle must be on level ground or service lift (NOT jacked up, NOT wheels hanging and NOT having the suspension unloaded). Wheels should support the vehicle or lift jacks should support the suspension as if the wheels are supporting it.

Make sure stabilizer bar end eyelet (B) is parallel with the control arm (C). Many times they are not. You may be required to use a slightly longer or shorter sleeve length than the original. Measure sleeve length (A) and compare to the chart to find the correct set.

(A)
Length --> Set Number

1" --> 9.8122
1 5/8" --> 9.8120
2" --> 9.8123
2 3/8" --> 9.8125
2 5/8" --> 9.8117
2 7/8" --> 9.8118
3 3/8" --> 9.8119
3 9/16" --> 9.8124
4 1/4" --> 9.8149
4 1/2" --> 9.8121