Do I have the right size Magnaflow??
#1
Senior Member
Posts like a Turbo
Thread Starter
Join Date: Oct 2002
Location: Philadelphia, PA
Posts: 266
Likes: 0
Received 0 Likes
on
0 Posts
Do I have the right size Magnaflow??
Car passes emissions when the CAT got installed but mech said muffler won't fit. I told him it'* the Fbody for the Camaro. My p/n is 12266, 5" x 8" 2 1/4" inlet then another 2 1/2" inlet and 2 1/4" outlet :?
#2
yes that is the correct one...
take some pics off the site and bring them to the guy.... you have to install it at an angle, unlike stock...
and you have 1 - 2.5" inlet and 2 - 2.25" outlets :P
take some pics off the site and bring them to the guy.... you have to install it at an angle, unlike stock...
and you have 1 - 2.5" inlet and 2 - 2.25" outlets :P
#3
Senior Member
True Car Nut
Join Date: Dec 2002
Location: Sauk Centre, MN
Posts: 5,459
Likes: 0
Received 0 Likes
on
0 Posts
You don't necessarily have to mount it at an angle. The exhaust guy can bend the piping to work with the muffler mounted flat.
And, yes, that is an exact replacement of your original muffler.
And, yes, that is an exact replacement of your original muffler.
#4
Senior Member
Certified Car Nut
Check it out!
http://www.bonneville.fearthepearl.c....php?page=mods
All the Correct #'* no matter what they say.
http://www.bonneville.fearthepearl.c....php?page=mods
All the Correct #'* no matter what they say.
#5
Senior Member
Posts like a Turbo
Thread Starter
Join Date: Oct 2002
Location: Philadelphia, PA
Posts: 266
Likes: 0
Received 0 Likes
on
0 Posts
ok I checked out Samco and linked to their distributer for a reducer coupler. Is this thing going to cost me $51.00???? I just relized from this link that I'm not supp to use a rubber reducer coupler for my TB > CAI hookup, Is that right?? I have arubber one from Home Depot plumbing section on there now. :?
#7
Thread
Thread Starter
Forum
Replies
Last Post
Mark Peters
Performance, Brainstorming & Tuning
10
03-21-2003 08:42 PM