Does this 0-60 seem right?
Senior Member
True Car Nut
Joined: Jan 2004
Posts: 4,328
Likes: 1
From: Lakeville, MN
.lol It'* like 0-60 sometime tommorow now since I sold my 383 lol
Guest
Posts: n/a
Originally Posted by alec_b
At 60 mine reads about 2200 RPM. Maybe a little higher.
I do 60 at about 1550-1600 in the 91 with 2.84 gears
and for the 95 its 1700 @ 60mph I think... with 3.06 gears.... Might have to scantool it in the future...
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
Thread Starter
Senior Member
Posts like a Northstar
Joined: Jan 2005
Posts: 781
Likes: 0
From: Richfield, MN
No my TCC doesn't engage. I'm still working on that prolem, but i think it'* the solenoid and i'm not pulling the tranny to fix it. Does anyone know an easier way to change the TCC solenoid w/o taking out the transmission? I know i'm wasting a ton of gas by it not working.
Guest
Posts: n/a
If you can get the cradle to come down you may be able to get the side pan off.. But you may run into a snag there depending on the amount of room needed for the sidepan to clear the valve body... The TCC solenoid is on the valvebody... So no real other way...
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
Senior Member
True Car Nut
Joined: Apr 2004
Posts: 4,879
Likes: 6
From: Three Oaks, Michigan
Damn dude.. 2200rpm at 60? I am at 2200rpm at 80. The TCC solenoid is replaced by removing the side pan.. If you remove all the crap sitting on the stand by the wheel-well, it won't be that bad to replace, in theory.
-justin
-justin
Thread Starter
Senior Member
Posts like a Northstar
Joined: Jan 2005
Posts: 781
Likes: 0
From: Richfield, MN
Well i'm pretty sure that'* the problem. It may not be getting the lockup signal too i'm not sure. I still have to check it out. Does anyone know how much the soleniod is?
Thread
Thread Starter
Forum
Replies
Last Post