Did a baseline dyno on my 03 SSEi today
Thread Starter
Senior Member
Posts like a Turbo
Joined: Jul 2005
Posts: 239
Likes: 1
From: Palatine, IL
Did a baseline dyno on my 03 SSEi today
My local Grand Prix club had a dyno day today and I decided the get a baseline dyno on my SSEi. All stock except for the Intense FWI I installed yesterday. My results were pretty good considering it was 85* with somewhat humid temps:
Run 1: 201.2 whp / 218ft lbs (Air Fuel Ratio 11.7)
Run 2: 201.6 whp / 220ft lbs (Air Fuel Ratio 11.
The power and torque curves were very nice and smooth. This car runs better than my GTP. :(
Run 1: 201.2 whp / 218ft lbs (Air Fuel Ratio 11.7)
Run 2: 201.6 whp / 220ft lbs (Air Fuel Ratio 11.
The power and torque curves were very nice and smooth. This car runs better than my GTP. :(
Senior Member
Posts like a 4 Banger
Joined: Oct 2004
Posts: 111
Likes: 0
What kind of dyno? Are those numbers SAE corrected? Has anyone else dyno'd their cars? Those look like really decent numbers to me, but I am not sure what the L67'* usually put to the ground...
Ed
Ed
Senior Member
True Car Nut
Joined: May 2003
Posts: 7,262
Likes: 0
Originally Posted by BlackFormula01
What kind of dyno? Are those numbers SAE corrected? Has anyone else dyno'd their cars? Those look like really decent numbers to me, but I am not sure what the L67'* usually put to the ground...
Ed
Ed
From what Rogue or BadSSEi was telling me from Bfest, those numbers are pretty accurate. My car is a 96 SSEi and they were saying a nromal is around 190whp
Thread Starter
Senior Member
Posts like a Turbo
Joined: Jul 2005
Posts: 239
Likes: 1
From: Palatine, IL
where did you all go to dyno?
Those look like really decent numbers to me, but I am not sure what the L67'* usually put to the ground...
sounds like a mustang dyno.
What kind of dyno? Are those numbers SAE corrected? Has anyone else dyno'd their cars?
:http://tg.dnsalias.com/sseibaselinedyno.jpg
Guest
Posts: n/a
With all of the questions about how much hp do I get when ..... or should I do xxxxx, a great database for the L67 showing the progression of mods would look something like:
Horsepower Torque
1. Stock
2. FWI
3. 3.4"
4. 180 degree thermostat
5. 1.9" rockers
6. headers
7. 3.25"
8. PCM
This way, people could see the increase in horsepower and torque resulting from each of the above steps and in the order shown.
Horsepower Torque
1. Stock
2. FWI
3. 3.4"
4. 180 degree thermostat
5. 1.9" rockers
6. headers
7. 3.25"
8. PCM
This way, people could see the increase in horsepower and torque resulting from each of the above steps and in the order shown.