control arm bushings
Thread Starter
Senior Member
Posts like a Turbo
Joined: Apr 2003
Posts: 342
Likes: 1
control arm bushings
not sure the right forum for this. It kinda covers all cars.
Has anyone changed their front control arm bushings, I have a old G1 H body that I'd like to put new rubber in or maybe even measure up and see if PST might have polygraphites that will work.
Im wondering if it turns into a nightmare to get the bolts out or anything else to keep an eye out for ? I know sometimes the bolts get hung up bad.
Has anyone changed their front control arm bushings, I have a old G1 H body that I'd like to put new rubber in or maybe even measure up and see if PST might have polygraphites that will work.
Im wondering if it turns into a nightmare to get the bolts out or anything else to keep an eye out for ? I know sometimes the bolts get hung up bad.
Senior Member
True Car Nut
Joined: Nov 2002
Posts: 6,042
Likes: 5
From: Texarkana, Texas
I've had em out, It'* fun. The hardest part is getting the steel sleeved bushing out of the control arm without bending it. It took me two six foot cheater bars and a good bit of sweat on those bolts, But getting them out of the control arm is even harder. Had to take a torch to it and smack them. I'd definatly go with polygraphite from PST, I've heard nothing but good about them.
Thread
Thread Starter
Forum
Replies
Last Post