Big 97 SSEi project!
#1
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Jun 2005
Location: Annapolis, MD
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Big 97 SSEi project!
Thanks to everyone who posts their knowledge on this forum...seriously.
I'm not much of a poster myself, but I read BC all the time and thanks to y'all, I have purchased and will be installing these products over the next few weeks:
ZZP'* Stage 2 Intercooler
ZZP 24.6x12.7x1.3" Intercooler Radiator
ZZP Fuel Logs
TOG Headers
INTENSE 3rd Gen LSD
INTENSE Stage 1x Camshaft
INTENSE 3rd Gen 1.6 Roller Rockers
INTENSE OR Rods
CompCams Springs
INTENSE PCM
INTENSE'* MPS with a 3.2" pulley
Autolite 103'*
160 T-Stat
If you want pictures as I go, let me know and I'll put 'em up.
Wish me luck!
I'm not much of a poster myself, but I read BC all the time and thanks to y'all, I have purchased and will be installing these products over the next few weeks:
ZZP'* Stage 2 Intercooler
ZZP 24.6x12.7x1.3" Intercooler Radiator
ZZP Fuel Logs
TOG Headers
INTENSE 3rd Gen LSD
INTENSE Stage 1x Camshaft
INTENSE 3rd Gen 1.6 Roller Rockers
INTENSE OR Rods
CompCams Springs
INTENSE PCM
INTENSE'* MPS with a 3.2" pulley
Autolite 103'*
160 T-Stat
If you want pictures as I go, let me know and I'll put 'em up.
Wish me luck!
#4
Senior Member
Posts like a Turbo
Join Date: Jan 2005
Location: Melbourne, FL
Posts: 289
Likes: 0
Received 0 Likes
on
0 Posts
What, I'm being outdone by another 96-99 Bonneville. Good luck with the install, it'* a lot of fun tearing the motor apart. If you don't have them already, get replacement harmonic balancer and camshaft bolts (these set my project back a week). They're torque to yield bolts and shouldn't be re-used, but they don't come with the S1X cam package. :?
#6
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Jun 2005
Location: Annapolis, MD
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 96SSEi_tampa
If you don't have them already, get replacement harmonic balancer and camshaft bolts (these set my project back a week). They're torque to yield bolts and shouldn't be re-used, but they don't come with the S1X cam package. :?