Best Spark Plug Wires under $40
#22
Senior Member
True Car Nut
Join Date: Jul 2003
Location: Westerville, Ohio 2000 Black SSEi
Posts: 6,127
Likes: 0
Received 1 Like
on
1 Post
Beldin is the way to go. They are 7mm however the lifetime warranty means you get a new wire anywhere on the planet if you need it. Wires get brittle over time and if you change your plugs every 100k you are bound to break a stocker (or other wire for that matter). I run them on my car without issue.
#23
Senior Member
Certified Car Nut
Join Date: Oct 2002
Posts: 11,308
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Rogue
Beldin is the way to go. They are 7mm however the lifetime warranty means you get a new wire anywhere on the planet if you need it. Wires get brittle over time and if you change your plugs every 100k you are bound to break a stocker (or other wire for that matter). I run them on my car without issue.
Thanks.
Stupid question: so these are only available at NAPA? I'm not sure of a NAPA around me.
#24
Originally Posted by bonnie94ssei
Stupid question: so these are only available at NAPA? I'm not sure of a NAPA around me.
2000 SSEi, belden wires
#27
Senior Member
True Car Nut
Thread Starter
Originally Posted by harofreak00
what do they say on the actual wires? mine say and FEEL like 7mm wires
8mm. dont make me go take a pic becuase I just woke up 3 minutes ago
#29
Senior Member
True Car Nut
Guys.... 8mm is the size for certain applications, 7mm for others. The Belden wires for my '97 were supposed to be 7mm, so I asked for a few different sets from different years of Bonneville until I found the ones that were 8mm. IIRC, 1995 and earlier SSEi models are listed as 8mm in Napa'* computer, though '96 and newer is only 7mm.
You're both right. Andrew'* wires are 7mm, and Hans has 8mm on his '93. Call Napa and verify if you want to make sure
You're both right. Andrew'* wires are 7mm, and Hans has 8mm on his '93. Call Napa and verify if you want to make sure
#30
DINOSAURUS BOOSTUS
Expert Gearhead
Randman did that ... got the wires in the 8mm. Problem was found that they aren't all the right length. You come up a little short on a couple.