ZZP Ported Mani's
#1
Senior Member
True Car Nut
Thread Starter
Join Date: Feb 2003
Location: Philly
Posts: 4,508
Likes: 0
Received 0 Likes
on
0 Posts
ZZP Ported Mani'*
I just installed a ceramic coated cross-over and ceramic coated/ported rear exaust manifold, originally from zzp. I got them from a guy who was going turbo, so he still needed the front mani.
Well, turns out, It DOSEN'T bolt up to the down pipe. It is close, but the studs WILL NOT go through the downpipe flange.
Just thought i'd give everyone a heads up, before they tried do use a non-bonneville rear exaust manifold.
Now i gotta go get my DP flange either drilled out or changed.
Well, turns out, It DOSEN'T bolt up to the down pipe. It is close, but the studs WILL NOT go through the downpipe flange.
Just thought i'd give everyone a heads up, before they tried do use a non-bonneville rear exaust manifold.
Now i gotta go get my DP flange either drilled out or changed.
#3
Junior Member
Posts like a Ricer Type-R
Sure do. There were something like 14 different configurations in exhaust manifolds from 92-99. We need to remember that ZZP isn't familiar with anything older than a 97.
And the DP configuration will be different because of the tighter space in the W chassis.
And the DP configuration will be different because of the tighter space in the W chassis.
Thread
Thread Starter
Forum
Replies
Last Post
OLBlueEyesBonne
Forced Induction
20
10-13-2006 02:55 AM
OLBlueEyesBonne
Performance, Brainstorming & Tuning
4
05-15-2005 12:31 AM
mkaake
1992-1999
12
03-08-2005 08:48 AM