Constant heated air through vents
#1
Member
Posts like a V-Tak
Thread Starter
Constant heated air through vents
Ok, so I got all my driveabilty issues sorted out now I have a problem of heated air coming through the vents. No mater what setting I have on the Auto climate control heated air blows through the vents, even when the Climate control is off I can faintly feel hot air through the vents.
When I turn the ignition on I hear a rattle coming from the top of the dash. Stripped actuator? Is there any threads on how to replace it?
When I turn the ignition on I hear a rattle coming from the top of the dash. Stripped actuator? Is there any threads on how to replace it?
#3
Member
Posts like a V-Tak
Thread Starter
#4
Senior Member
If I remember right, you have to remove the glove box.......then on top of the HVAC module, you will see an actuator with an arm, where a silver metal linkage clips into the arm of the actuator, from the temp door....sometimes that linkage pops out of the arm, and then there will be no temp change......
So remove glove box, and command the control head from full cold to full hot to see if the actuator moves and if the linkage is intact....
So remove glove box, and command the control head from full cold to full hot to see if the actuator moves and if the linkage is intact....
#5
Member
Posts like a V-Tak
Thread Starter
If I remember right, you have to remove the glove box.......then on top of the HVAC module, you will see an actuator with an arm, where a silver metal linkage clips into the arm of the actuator, from the temp door....sometimes that linkage pops out of the arm, and then there will be no temp change......
So remove glove box, and command the control head from full cold to full hot to see if the actuator moves and if the linkage is intact....
So remove glove box, and command the control head from full cold to full hot to see if the actuator moves and if the linkage is intact....
The car is running like crap again so my HVAC repairs are on hold. Stumbling, rough idle, backfire from intake manifold and stalling, no SES light or new codes.
Thread
Thread Starter
Forum
Replies
Last Post
praiseteamof2
GMC/Chevrolet Truck/SUV
5
12-05-2011 05:57 PM