4t65e swap
#11
Retired
You should be able to get the pinout diagrams at www.alldatadiy.com i have a subscription there also and love it.
#14
Retired
97 bonneville and 2000 blazer
#15
Member
Posts like a V-Tak
Thread Starter
Join Date: Jan 2012
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
what I'm having to do is repin my 96 harness and add in the tranny plug. But at least this way every thing will match up. I have the pcm plugs repined all but to wires that don't match up. But I'm done for the night, I'll keep going sunday
#16
Member
Posts like a V-Tak
Thread Starter
Join Date: Jan 2012
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
ok all the codes are gone. So rebuilding the 96 harness was the key. I do have one problem when I put the tranny in gear my traction control comes on. If I unhook the two traction control wires then all is fine but the dash light is on saying traction control off. I even tried swapping the two wires but got the same. Any ideas???
Thanks
Thanks
#17
Member
Posts like a V-Tak
Thread Starter
Join Date: Jan 2012
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
also this web site has the pcm pinouts. It'* for fiero'* to different gm computers but the pinouts are the right ones
GM Wiring Diagrams and Pinouts
GM Wiring Diagrams and Pinouts
Thread
Thread Starter
Forum
Replies
Last Post
buckykattnj
Performance, Brainstorming & Tuning
6
02-15-2011 06:36 AM
timg
Performance, Brainstorming & Tuning
9
10-26-2005 07:51 PM