1997 LSS
Problem 1.
Noticed my headlights were out after leaving work at night, decided to check if my high beams were working and when I pulled back on the column lever to engage the hi beams they came on however the lever stuck in the on position. I was able to get the lever unstuck but it will not stay engaged anymore.
Problem 2.
Headlights will not come on during night time driving. I noticed that my daytime running lights were working periodically as I could see the reflection off the car in front of me and they did go off when I put the car in park. When I got home I had no daytime running lights with the car in park or drive.
I have checked all fuses under dash and hood all seemed to be ok I also changed the head light bulbs. All of the fog lights brake and running lights are working but i cannot get the regular headlights to work. I'm not sure where to go from Here any help would be appreciated .
Noticed my headlights were out after leaving work at night, decided to check if my high beams were working and when I pulled back on the column lever to engage the hi beams they came on however the lever stuck in the on position. I was able to get the lever unstuck but it will not stay engaged anymore.
Problem 2.
Headlights will not come on during night time driving. I noticed that my daytime running lights were working periodically as I could see the reflection off the car in front of me and they did go off when I put the car in park. When I got home I had no daytime running lights with the car in park or drive.
I have checked all fuses under dash and hood all seemed to be ok I also changed the head light bulbs. All of the fog lights brake and running lights are working but i cannot get the regular headlights to work. I'm not sure where to go from Here any help would be appreciated .
Operation CHARM: Car repair manuals for everyone.
Home >> Oldsmobile >> 1997 >> LSS V6-3.8L VIN K >> Repair and Diagnosis >> Lighting and Horns >> Ambient Light Sensor >> Service and Repair
Remove or Disconnect
1. Windshield defroster grille from I/P by prying upward, disconnect sensors (if equipped).
^ Turn sensors 1/4 turn to release.
Install or Connect
1. Sensors (if equipped) into defroster grille and press into place, turn 1/4 turn to secure.
2. Windshield defroster grille to I/P. Insert forward edge first, then press rear edge into position.
pro multis · About Operation CHARM
Home >> Oldsmobile >> 1997 >> LSS V6-3.8L VIN K >> Repair and Diagnosis >> Lighting and Horns >> Ambient Light Sensor >> Service and Repair
Ambient Light Sensor: Service and Repair
Description:
Remove or Disconnect
1. Windshield defroster grille from I/P by prying upward, disconnect sensors (if equipped).
^ Turn sensors 1/4 turn to release.
Install or Connect
1. Sensors (if equipped) into defroster grille and press into place, turn 1/4 turn to secure.
2. Windshield defroster grille to I/P. Insert forward edge first, then press rear edge into position.
pro multis · About Operation CHARM
Sounds like the high/low-beam switch in the turn signal stalk is bad. That switch switches from low-beam only to high-beam only and back. These do not leave the low beams on when the high-beams are on.
Thread
Thread Starter
Forum
Replies
Last Post










