P0327
09-27-2009, 01:40 PM
#1
Retired Senior Admin
Expert Gearhead
Thread Starter
Join Date: May 2006
Location: Sheboygan Wisconsin
Posts: 29,661
Likes: 0
Received 28 Likes
on
24 Posts
P0327
P0327
Description
KNOCK SENSOR CIRCUIT BANK 1
Knock Sensor (KS) is used to detect engine detonation
(knock). When KS module in PCM determines that an abnormally high
noise channel voltage exists, PCM will set DTC P0327.
Symptoms
You may notice problems including a lack of power and perhaps some hesitation.
Causes
Description
KNOCK SENSOR CIRCUIT BANK 1
Knock Sensor (KS) is used to detect engine detonation
(knock). When KS module in PCM determines that an abnormally high
noise channel voltage exists, PCM will set DTC P0327.
Symptoms
You may notice problems including a lack of power and perhaps some hesitation.
Causes
- The knock sensor is faulty and needs to be replaced
- There is a wiring short/fault in the knock sensor circuit
- Mechanical problem with the engine.
- Check the resistance of the knock sensor
- Check sensor voltage
- Check for broken/frayed wires leading to the sensor
- Replace the knock sensor
- If knock can be heard repair engine.
