WOW TOTALY FREAKING BIZZARE MUST READ
#1
Senior Member
Posts like a Turbo
Thread Starter
Join Date: Mar 2004
Location: Ozaukee, WI
Posts: 472
Likes: 0
Received 0 Likes
on
0 Posts
WOW TOTALY FREAKING BIZZARE MUST READ
Well as some of you know I have been having some transmission problems on my 95 zetec auto.........The (what I think) solenoid pack is shot (not 100% sure my guess) and it would constantly upshift/downshift/pop into neutral then slam back into gear once my transmission would get warm....... Then I noticed the plug that is right by the solenoid pack on the top of the TRANNY.......and thought wonder what would happen if i took this off.......I said ahh **** it cant be ne worse than how it is.......I took it off and wham bam the problems are gone...... but the transmission is fucked cause its good in P R and N but when I am in D or 2 It will stay in 3rd gear no matter what even from the stop sign and when I put it into 1st it goes into 2nd gear........So its like having a tranny with no OD nor 1st gear........ This causes alot of stress on the engine and trannsmission when starting from a stop sign like hardcore stress the tranny whines till it grabs totally...... I wonder if this will make the tranny go quicker or not........
BTW THERE ARE LIKE 10 WIRES COMMING FROM THIS PLUG THAT I DISSCONECTED OFF THE TRANNY
BTW THERE ARE LIKE 10 WIRES COMMING FROM THIS PLUG THAT I DISSCONECTED OFF THE TRANNY
#2
Senior Member
True Car Nut
Join Date: May 2003
Location: Lethbridge, Alberta, _______Canada._______ West Coast Bonneville Fest ___05,06,07 Survivor___
Posts: 8,135
Likes: 0
Received 0 Likes
on
0 Posts
it makes compleat sense as to why it stays in 3rd gear, that plug you undid senses when to down shift and up shift, if its not getting a signal it probally wont know what gear to be in, causing alot of issues, this solienoid is probally your inital problem, if its acting like you say, the solienoid is messed up and sending poor readings about, once unhooked there is no poor readings cause there is non at all...
#4
Senior Member
Certified Car Nut
Join Date: Jul 2003
Location: Robbinsdale, MN
Posts: 15,408
Likes: 0
Received 0 Likes
on
0 Posts
Re: WOW TOTALY FREAKING BIZZARE MUST READ
Originally Posted by killer_cr80r
Well as some of you know I have been having some transmission problems on my 95 zetec auto.........The (what I think) solenoid pack is shot (not 100% sure my guess) and it would constantly upshift/downshift/pop into neutral then slam back into gear once my transmission would get warm....... Then I noticed the plug that is right by the solenoid pack on the top of the TRANNY.......and thought wonder what would happen if i took this off.......I said ahh f*** it cant be ne worse than how it is.......I took it off and wham bam the problems are gone...... but the transmission is f*** cause its good in P R and N but when I am in D or 2 It will stay in 3rd gear no matter what even from the stop sign and when I put it into 1st it goes into 2nd gear........So its like having a tranny with no OD nor 1st gear........ This causes alot of stress on the engine and trannsmission when starting from a stop sign like hardcore stress the tranny whines till it grabs totally...... I wonder if this will make the tranny go quicker or not........
BTW THERE ARE LIKE 10 WIRES COMMING FROM THIS PLUG THAT I DISSCONECTED OFF THE TRANNY
BTW THERE ARE LIKE 10 WIRES COMMING FROM THIS PLUG THAT I DISSCONECTED OFF THE TRANNY
#6
Senior Member
Posts like a Turbo
Thread Starter
Join Date: Mar 2004
Location: Ozaukee, WI
Posts: 472
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Twister97
Ahhh, just rebuild the tranny over the summer
:P
#7
Senior Member
True Car Nut
Join Date: Aug 2003
Location: Racine Wi
Posts: 5,146
Likes: 0
Received 0 Likes
on
0 Posts
i dont think the tranny will last 2yrs??
junkyard tranny??!!
another thing the way i learned to work on cars and many others from this site is pay attention whatch and learn or just try to accomplish the project your self with all the right building blocks blocks you shouldnt need school (only if you wanna become ASE cerified)
just my .02
junkyard tranny??!!
another thing the way i learned to work on cars and many others from this site is pay attention whatch and learn or just try to accomplish the project your self with all the right building blocks blocks you shouldnt need school (only if you wanna become ASE cerified)
just my .02
#9
Senior Member
Posts like a Turbo
Thread Starter
Join Date: Mar 2004
Location: Ozaukee, WI
Posts: 472
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Twister97
Yea, junkyard tranny would be an excellent idea! I am sure they are easy to find for that model car.
OK,
By disconnection the harness you bypassed the electronic shift solenoids so the PCM can not shift the transmission. You are basically in limp home mode (by default 3rd gear). The real problem is you also disco’d your line pressure regulator. Without the regulator you are subjecting you tranny’* hydraulic system to extreme pressures that will cause it to fail for sure!
You can not trouble shoot an electronic controlled automatic by the seat of your pants. You need to run a full power train diag and hydraulic system pressure checks before you do anything else. This requires test equipment and technical knowledge of the ATX and PCM.
If you really want to try to shot gun it, replace the range sensor. Based on your descriptions it is the most likely component, the easiest to change and the least expensive. You do not want to try and change the solenoids with out a manual and some good tools.
jeff
#10
Senior Member
True Car Nut
Join Date: Feb 2004
Location: Pennsylvania
Posts: 5,177
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by killer_cr80r
Originally Posted by Twister97
Yea, junkyard tranny would be an excellent idea! I am sure they are easy to find for that model car.
OK,
By disconnection the harness you bypassed the electronic shift solenoids so the PCM can not shift the transmission. You are basically in limp home mode (by default 3rd gear). The real problem is you also disco’d your line pressure regulator. Without the regulator you are subjecting you tranny’* hydraulic system to extreme pressures that will cause it to fail for sure!
You can not trouble shoot an electronic controlled automatic by the seat of your pants. You need to run a full power train diag and hydraulic system pressure checks before you do anything else. This requires test equipment and technical knowledge of the ATX and PCM.
If you really want to try to shot gun it, replace the range sensor. Based on your descriptions it is the most likely component, the easiest to change and the least expensive. You do not want to try and change the solenoids with out a manual and some good tools.
jeff
Get a junkyard tranny to rebuild it, so you can still drive your other car for the summer. That is what I was talking about, and I think G'O was to