wishing i had this display setup
Junior Member
Posts like a Ricer Type-R
Joined: Aug 2002
Posts: 11
Likes: 13
My workstation at work is a twin 21" LCD setup. That quad setup is a creation of mine for a Research and Development tool you can vaguely see in the background. It'* a custom laser system with 6 lasers feeding it. The 3 monitors on the bottom are a necessity to even be able to run the thing.
Junior Member
Joined: Aug 2005
Posts: 0
Likes: 0
Originally Posted by willwren
My workstation at work is a twin 21" LCD setup. That quad setup is a creation of mine for a Research and Development tool you can vaguely see in the background. It'* a custom laser system with 6 lasers feeding it. The 3 monitors on the bottom are a necessity to even be able to run the thing.
haha, ok i am now resigning as a computer hardware engineer...
little more detail to understand what the heck ur talkin about is TOTALLY necissary...
Junior Member
Posts like a Ricer Type-R
Joined: Aug 2002
Posts: 11
Likes: 13
Four 19'*. The outer two are hinged to adjust the angle of them, the upper one has a 10° downward slant. The framing that holds them in place is Bosch extruded aluminum strut, and all 4 monitors have their USB daisy-chained so the lower three monitors are all USB hubs.
The workstation is over 30' of cabling away, so it took 2 powered USB hubs to extend that far, and the video cables were custom made.
Driverjohn has seen this setup. Chadow427 will next month.
The workstation is over 30' of cabling away, so it took 2 powered USB hubs to extend that far, and the video cables were custom made.
Driverjohn has seen this setup. Chadow427 will next month.
Senior Member
True Car Nut
Joined: Jan 2006
Posts: 8,029
Likes: 1
From: NEBF:06,07 | NYBF:06,07 | ONBF:06,07 | CNBF:06 & more............
Originally Posted by willwren
Four 19'*. The outer two are hinged to adjust the angle of them, the upper one has a 10° downward slant. The framing that holds them in place is Bosch extruded aluminum strut, and all 4 monitors have their USB daisy-chained so the lower three monitors are all USB hubs.
The workstation is over 30' of cabling away, so it took 2 powered USB hubs to extend that far, and the video cables were custom made.
Driverjohn has seen this setup. Chadow427 will next month.
The workstation is over 30' of cabling away, so it took 2 powered USB hubs to extend that far, and the video cables were custom made.
Driverjohn has seen this setup. Chadow427 will next month.
vary nice man..., im thinking of moveing my 19CRT and putting the two LCD'* right next to eachother and doing a dual monitor setpu on my main pc....
oo also willwren... what video card are you useing , you said "workstation" did you forget the ( * ) or are all 4 LCD'* on one pc.. if so what video card(*) are yuo useing..?