here is the situation

I have a 1992 crown vic with the police package. I was discussing this with my dad and we were brainstorming ideas for some preformance mods to do and my dad brought up the possibility of bolting on a supercharger on. And since i know this club has extensive knowledge of forced induction. my question is
Is it feasabile? (now i know if i had an unlimited budget anything is possible) but realisticly can it be done???

Well, yeah. Motor is based on the Mustang motor, right? Start there.

same motor and the engine bay and the car its self is bigger than the mustang so i have a bit more room to fit things or modify to fit if need be

wouldnt a police package typically come supercharged? There may be a bolt on out there. But Im not more of an expert then you Nick

all crown vics came N/A

but hopefuly in the future i'll be the proud owner of the first boosted cvpi

I would think a Mustang supercharger kit would work just fine. You might need to change the intake routing. Ignition stuff, cams, heads...

ya anything that you can get for the 5.0 or 4.6 stang will work on the vic.
the ppolice package just has a stronger trans, suspention and a diff computer chip and intake/heads over the reg version.

then it looks like the CVPI will be getting some BOOOOOOST

put on a kb twin screw

now i know it has the 4.6 but is it the SOHC or DOHC version? there should be a good aftermarket for both, as both were/are in the Mustang, but im just curious.

but as was said anything for the Mustang and probably the T-bird Supercoupe should work.