new member
I just want to introduce myself. I just found the Bonneville Club. I have a 2000 SSEI. Thrasher Charged 3.25 pulley. I made my own Shorty ram out of 3.5 stainless Pipe with a mushroom filter. Cleared Corners. 20% all around. Mufflers deleted. Sounds bad a$$ under boost.
Future Mods
19 inch black and chrome rims
Lambo Doors (hinges are ordered)
more aggressive cam and head port job
New paint (working on design)
Future Mods
19 inch black and chrome rims
Lambo Doors (hinges are ordered)
more aggressive cam and head port job
New paint (working on design)
Is the only engine mod you have a 3.25" pulley???
If so you might want to start doing some other mods REALLY soon. You need quite a few supporting mods to run that size pulley.
Welcome to the club, I know you'll enjoy it here!
Shawn
If so you might want to start doing some other mods REALLY soon. You need quite a few supporting mods to run that size pulley.
Welcome to the club, I know you'll enjoy it here!
Shawn
Sorry left out a few things. Nology Wires. Computer, I bought from friend that was running that pulley. Exhaust is opened up. 180 thermastat. As far as the pulley goes I have not had no problems. It ran hot until the thermastat was switched. Computer was supposedly redone by SLP but I am not sure of that. I do know once computer and pulley were installed and the exhaust opened the car really started to fly. Sounds bad *** too
Welcome to BC!
Sounds like you're already hooked on mods, so be warned....this place won't help you stop, heh, heh. Take a gander around and check some of the boards, like Performance, etc. I think you'll like it here.
Sounds like you're already hooked on mods, so be warned....this place won't help you stop, heh, heh. Take a gander around and check some of the boards, like Performance, etc. I think you'll like it here.






