GMC/Chevrolet Truck/SUV When starting new posts, please specify YEAR, MAKE, MODEL, ENGINE type, and whatever modifications you have made.
Sponsored by:
Sponsored by: CARiD

cold start then stalls 93 suburban

Thread Tools
 
Search this Thread
 
Old Dec 21, 2022 | 10:05 AM
  #1  
nataly's Avatar
Thread Starter
Junior Member
 
Joined: Dec 2022
Posts: 6
Likes: 0
From: wheat ridge co
nataly is on a distinguished road
Default cold start then stalls 93 suburban

93 chevy 1500 suburban 5.7 motor, when cold starts then stalls I have to hold down throttle for it to run. Once it starts it runs great and warm starts are no problem
219 k miles.newer fuel pump new cap and rotor, ignition modual and new coil, also dissconnected the battery to reset, then the truck started right up but next day same old problems.
Any ideas? thanks
Reply
Old Dec 21, 2022 | 11:20 AM
  #2  
carfixer007's Avatar
Senior Member


True Car Nut
 
Joined: Dec 2018
Posts: 3,239
Likes: 1,597
From: Flint, MI USA
carfixer007 is on a distinguished road
Default

Clean the throttle body.
Reply
Old Dec 21, 2022 | 04:12 PM
  #3  
nataly's Avatar
Thread Starter
Junior Member
 
Joined: Dec 2022
Posts: 6
Likes: 0
From: wheat ridge co
nataly is on a distinguished road
Default

Ok I'll give it a try... thanks
Reply
Old Dec 21, 2022 | 05:24 PM
  #4  
carfixer007's Avatar
Senior Member


True Car Nut
 
Joined: Dec 2018
Posts: 3,239
Likes: 1,597
From: Flint, MI USA
carfixer007 is on a distinguished road
Default

Make sure you get it clean and the IAC also. Those symptoms are typical of a dirty TB and IAC.
Reply
Old Dec 24, 2022 | 11:00 AM
  #5  
nataly's Avatar
Thread Starter
Junior Member
 
Joined: Dec 2022
Posts: 6
Likes: 0
From: wheat ridge co
nataly is on a distinguished road
Default

Thanks I will work on it next week, I have to work and its been super cold. Merry Christmas and God Bless!
Reply
Old Jan 28, 2023 | 12:25 PM
  #6  
nataly's Avatar
Thread Starter
Junior Member
 
Joined: Dec 2022
Posts: 6
Likes: 0
From: wheat ridge co
nataly is on a distinguished road
Default

OK I replaced the IAC and cleaned the throttle body with the same result. Truck starts then stalls after several tries and holding the throttle down it starts and runs smooth. No problem once it starts. any other areas to look at?
Reply
Old Jan 28, 2023 | 10:54 PM
  #7  
carfixer007's Avatar
Senior Member


True Car Nut
 
Joined: Dec 2018
Posts: 3,239
Likes: 1,597
From: Flint, MI USA
carfixer007 is on a distinguished road
Default

Need to put a scan tool on it and see what the TPS and MAP/BARO are doing.
Reply
Old Jan 29, 2023 | 01:12 AM
  #8  
CathedralCub's Avatar
Senior Member


True Car Nut
 
Joined: Feb 2015
Posts: 6,809
Likes: 1,006
From: Earth
CathedralCub is a splendid one to beholdCathedralCub is a splendid one to beholdCathedralCub is a splendid one to beholdCathedralCub is a splendid one to beholdCathedralCub is a splendid one to beholdCathedralCub is a splendid one to beholdCathedralCub is a splendid one to behold
Default

What carfixer007 said ^^^^^^^

. . . and I'm curious if the IAC does anything at all, like if you pull it out then turn on the ignition does it do anything?
Reply
Old Jan 29, 2023 | 11:59 PM
  #9  
nataly's Avatar
Thread Starter
Junior Member
 
Joined: Dec 2022
Posts: 6
Likes: 0
From: wheat ridge co
nataly is on a distinguished road
Default

The tps and map are new.. not throwing any codes
Reply
Old Jan 30, 2023 | 12:46 AM
  #10  
CathedralCub's Avatar
Senior Member


True Car Nut
 
Joined: Feb 2015
Posts: 6,809
Likes: 1,006
From: Earth
CathedralCub is a splendid one to beholdCathedralCub is a splendid one to beholdCathedralCub is a splendid one to beholdCathedralCub is a splendid one to beholdCathedralCub is a splendid one to beholdCathedralCub is a splendid one to beholdCathedralCub is a splendid one to behold
Default

Originally Posted by nataly
The tps and map are new.. not throwing any codes
I'm curious if the IAC does anything at all, like if you pull it out then turn on the ignition does it do anything?
Reply



All times are GMT -4. The time now is 03:51 PM.