First post here, you guys seem pretty well educated on these trucks.
Truck is what title says, any tips, pointers for the job i'm looking to take on here?

Directions say clearly state the vehicle. 2000 Chevy Trailblazer. 4 door.
99,500 miles-second owner. 4x4, no modifications (lift, lower, etc).
The 4.3 L V6 Engine.

I'm really doing the two front wheels and some steering components. I have 4 new tires for it already, and i just purchased the following- but most importantly the control arms. I can replace Rotors, pads, bearings already- just never done the arms. Or the pitman/idler arm....or the tie rod ends..

ACDELCO 18A862AC Rotor x2
ACDELCO 46A0222A Tie Rod End x2
ACDELCO 46A0930A Tie Rod End x2
ACDELCO 45C1043 Idler Arm x1 (Have new moog Pitman)
DORMAN 31064 Bumper
MOOG CK620173 Control Arm
MOOG CK620172 Control Arm
MOOG RK620464 Control Arm
MOOG RK620300 Control Arm
MOOG ES2004S Tie Rod End Adjusting Sleeve
MOOG K700526 Stabilizer Bar Link
TIMKEN 513124 Wheel Bearing & Hub Assembly x2
WAGNER SX726 Brake Pad