1998 GMC Sonoma S5 step-side pick-up - HVAC
Thread Starter
Junior Member
Joined: Dec 2020
Posts: 2
Likes: 0
1998 GMC Sonoma S5 step-side pick-up - HVAC
1998 GMC Sonoma S5 step-side pick-up - HVAC
Problem: Medium heat only through floor vents & only when vent selector mode is Floor only.
Current outside air temp range 60 - 68 (when TS)
Setttings:
With fan #4 position selected (strong air flow) and temp selector hot :
Mode selector position:
floor + defrost - floor vents & defrost vents low air flow, slightly warm
floor only - warm (but not hot) air flow - no air from dash
dash only - cold (compressor clutch not on) & dash air flow strong - no air from floor
dash & floor - dash cool, floor medium
A/C dash & floor - dash cold, floor cold
A/C & Max A/C both very cold & compressor clutch on.
TS to date:
1. both heater hoses under hood hot (last rediator &/or heater core flush unknown)
2. Dex-cool coolant level full
3. HVAC fuses ok
4. fan control good, all 4 positions work well
5. mode control shifts air to proper vents
6. temperature control not controling temperature correctly
Tried following youtube video on blend door actuator, but ran into following problems:
Blend door VACUUM actuator lever only moves when "floor only" mode selected.
Can't get the VACUUM actuator to slide up out of its bracket to move it out of the way to remove & inspect the
blend door actuator. (Didn't want to try forcing it, just in case my model is different & has screws or clips)
youtube video from 1:45 to 4:16 for visual orientation:
"GMC Chevy Blend Door Actuator Repair Replacement Fix Constant Heat Cracked Gear J-B Weld Repair"
Any suggestions?
Problem: Medium heat only through floor vents & only when vent selector mode is Floor only.
Current outside air temp range 60 - 68 (when TS)
Setttings:
With fan #4 position selected (strong air flow) and temp selector hot :
Mode selector position:
floor + defrost - floor vents & defrost vents low air flow, slightly warm
floor only - warm (but not hot) air flow - no air from dash
dash only - cold (compressor clutch not on) & dash air flow strong - no air from floor
dash & floor - dash cool, floor medium
A/C dash & floor - dash cold, floor cold
A/C & Max A/C both very cold & compressor clutch on.
TS to date:
1. both heater hoses under hood hot (last rediator &/or heater core flush unknown)
2. Dex-cool coolant level full
3. HVAC fuses ok
4. fan control good, all 4 positions work well
5. mode control shifts air to proper vents
6. temperature control not controling temperature correctly
Tried following youtube video on blend door actuator, but ran into following problems:
Blend door VACUUM actuator lever only moves when "floor only" mode selected.
Can't get the VACUUM actuator to slide up out of its bracket to move it out of the way to remove & inspect the
blend door actuator. (Didn't want to try forcing it, just in case my model is different & has screws or clips)
youtube video from 1:45 to 4:16 for visual orientation:
"GMC Chevy Blend Door Actuator Repair Replacement Fix Constant Heat Cracked Gear J-B Weld Repair"
Any suggestions?
Thread
Thread Starter
Forum
Replies
Last Post
killer_cr80r
Lounge
8
Apr 3, 2004 07:16 PM
evilsaint
1992-1999
2
Oct 22, 2003 01:09 AM
