I recently change my passenger side hub bearing and now if I make a sharp light out of parking the light pops on or something if I drive straight for a block then the light will cone on. Could it be a faulty wire in the hub bearing or could it be a different hub now acting up.i would hate to take the truck to the dealer to get scanned and found out its the hub bearing I changed.

Did you go aftermarket or Gm on the hub bearing? Seen alot of issues out of the cheap aftermarkets.

Unfortunately aftermarket didn't want to spend 200 plus dollars

There are a multitude of issues that could cause the service stability light to come on. Before I bought a scanner that could read ABS codes I took my Bonneville into a transmission shop to get the codes read. Their scanners are usually capable of reading the codes and they tend to be much cheaper than the dealership.

Timken hub/bearings for your truck are available at rockauto.com for $100. You don't need to spend $200 to get the best.

$100 how much I spent on the duralast one well better change it to the Timken one

I spent $100 on a duralast hub bearing at autozone but I see that'* no good

Passenger side hub changed and all is good must of been a faulty wire from the sensor.