What do i need to ground on the diagnostic plug to get codes
#1
Senior Member
Posts like a Supercharger
Thread Starter
Join Date: Aug 2005
Location: Saukville Wisconsin
Posts: 193
Likes: 0
Received 0 Likes
on
0 Posts
What do i need to ground on the diagnostic plug to get codes
What do i need to ground ne1 have a pic wana see if my car has ne codes and also where can i get what the codes mean newhere on internet?
#2
Senior Member
Certified Car Nut
Join Date: Oct 2003
Posts: 19,756
Likes: 0
Received 0 Likes
on
0 Posts
you cannot scan the codes yourself, and you will have problems having the local Advance and autozone scanning the car, from my experiece anyway
you have a OBD 1/2
you have a OBD 1/2
#4
Senior Member
Certified Car Nut
Join Date: Oct 2003
Posts: 19,756
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by ieatfeets
havent heard of an obd 1/2...
it the connector is obd 1 (shaped like a square) its the top right two.
it the connector is obd 1 (shaped like a square) its the top right two.
and he has a OBD1 connector that spit out OBD2 codes, and they CANNOT be scanned....93 was the last year of the "flash feature" to get the codes
#5
Junior Member
Posts like a Ricer Type-R
Originally Posted by ieatfeets
havent heard of an obd 1/2...
it the connector is obd 1 (shaped like a square) its the top right two.
it the connector is obd 1 (shaped like a square) its the top right two.
Thread
Thread Starter
Forum
Replies
Last Post