Tinted tail, Head & Fog lights.. Update page 5
Senior Member
Posts like a Northstar
Joined: Dec 2006
Posts: 699
Likes: 0
From: SW Florida
bad news
didnt work out.. the film was a bitch to apply to the headlights
it was paper thin, hard to play with and stretch and doesnt stick good
so i tried using the same thick flim i used on my tail lights
after finishing it i had no light output at all lol
it cut the light out by atleast 50% so i just took it off... it looked so mean! i wish i can do it lol
so no front tint yet.. looking for another/better option
any input guys?
didnt work out.. the film was a bitch to apply to the headlights
it was paper thin, hard to play with and stretch and doesnt stick good
so i tried using the same thick flim i used on my tail lights
after finishing it i had no light output at all lol
it cut the light out by atleast 50% so i just took it off... it looked so mean! i wish i can do it lol
so no front tint yet.. looking for another/better option
any input guys?
Have you seen my car? I used the same process as I did my tails on my HL just a little bit lighter (had my fogs tinted too, but now they are back to clear as they look better clear with my Halo'*..so this proves it is easily un-done)
I have 6000k HID'* and they are plenty bright...I would say it cut my light output down by about 25% since they are still brighter than halogens..
Like I said I had my Fogs done too, but decided to un-do them and simply wet sanded them down with 400 grit, 600 grit, 1200 grit and buffed them out and re-coated them with my magic HL coating I use when restoring Headlights down here.
PM me for more info.
Thread Starter
Senior Member
True Car Nut
Joined: Mar 2009
Posts: 2,894
Likes: 0
From: Fort crack homie
Have you seen my car? I used the same process as I did my tails on my HL just a little bit lighter (had my fogs tinted too, but now they are back to clear as they look better clear with my Halo'*..so this proves it is easily un-done)
I have 6000k HID'* and they are plenty bright...I would say it cut my light output down by about 25% since they are still brighter than halogens..
Like I said I had my Fogs done too, but decided to un-do them and simply wet sanded them down with 400 grit, 600 grit, 1200 grit and buffed them out and re-coated them with my magic HL coating I use when restoring Headlights down here.
PM me for more info.
I have 6000k HID'* and they are plenty bright...I would say it cut my light output down by about 25% since they are still brighter than halogens..
Like I said I had my Fogs done too, but decided to un-do them and simply wet sanded them down with 400 grit, 600 grit, 1200 grit and buffed them out and re-coated them with my magic HL coating I use when restoring Headlights down here.
PM me for more info.
Thread
Thread Starter
Forum
Replies
Last Post
YoungGunLs1
Your Ride: GM Pictures & Videos
31
Feb 6, 2010 08:37 PM
ELMACHOGERACHO
Your Ride: GM Pictures & Videos
44
Feb 8, 2006 09:25 PM