takin the old bonnie out back...
Thread Starter
Senior Member
True Car Nut
Joined: Jan 2003
Posts: 3,734
Likes: 0
From: Bloomington-Normal, IL 1997 SE
takin the old bonnie out back...
...and putting her down. I was driving it home on new years when it starting knocking really bad. After it limped home, we towed it to a shop, where we found out there is a bad bearing on either the crank or the connecting rod. A new short block would be needed, and the car already needs $2000 worth of transmission work. We decided to take the wheels and junk it. I'm kinda sad since this was my first car, but hopefully I will get to move up to the 2000 bonneville now 
Senior Member
True Car Nut
Joined: Dec 2003
Posts: 7,965
Likes: 0
From: Right in front of you
That is terrible to hear. It'* a shame she can't be fixed. We've had some transmissions fixed in the past few years and it only ran about $1300. I don't mind fixing my 1994 because I know what all I've got into it already. I wouldn't want to buy someone else'* problem.
Thread Starter
Senior Member
True Car Nut
Joined: Jan 2003
Posts: 3,734
Likes: 0
From: Bloomington-Normal, IL 1997 SE
thats $2000 for the trans and another $2000 for a new engine. Im 3 hours away at school and nobody else has the time to part it out. We are taking the wheels and thats it.
Senior Member
True Car Nut
Joined: Dec 2003
Posts: 7,965
Likes: 0
From: Right in front of you
Originally Posted by macho_mike21
thats $2000 for the trans and another $2000 for a new engine. Im 3 hours away at school and nobody else has the time to part it out. We are taking the wheels and thats it.
Senior Member
Posts like a Camaro
Joined: Dec 2002
Posts: 1,079
Likes: 1
From: Northeast MS
u should just drop a used engine and tranny in from the junkyard, my yard that i go to frequently i could get a low mileage engine for 350 and a tranny for about 450-500.
Moms 94 SSE got a 80000 mileage engine in it 2 years ago for 300.00 and it is still runnin to this day*knocks on wood*
Moms 94 SSE got a 80000 mileage engine in it 2 years ago for 300.00 and it is still runnin to this day*knocks on wood*
Thread Starter
Senior Member
True Car Nut
Joined: Jan 2003
Posts: 3,734
Likes: 0
From: Bloomington-Normal, IL 1997 SE
nobody at my house has time to do it. Finding the motor and trans isnt the expensive part, its getting them put in. Labor is what kills you. I would go for a L67/4t65e-HD anyway.
Senior Member
Posts like a Northstar
Joined: Jul 2003
Posts: 594
Likes: 0
From: GTA, ON, Canada
That sucks- kinda reminds me of my 89 SSE'* death
Engine had a knock, the coil pack went, and it was only firing on a few cylinders, the tranny was about to go, it needed 4 new tires, new ball joints, a tie rod and a new rad. So I don't regret the decision to let her go, as I parted it out myself, and all that was left was a steele carcus. I do miss that car...good memories.
When I got my 91- it had all the options that I did not have on the 89 but needed a lot of work. perfect frame though. and then the work began.....
Engine had a knock, the coil pack went, and it was only firing on a few cylinders, the tranny was about to go, it needed 4 new tires, new ball joints, a tie rod and a new rad. So I don't regret the decision to let her go, as I parted it out myself, and all that was left was a steele carcus. I do miss that car...good memories.
When I got my 91- it had all the options that I did not have on the 89 but needed a lot of work. perfect frame though. and then the work began.....
