Strange smell
Thread Starter
Senior Member
Posts like a Corvette
Joined: May 2003
Posts: 1,305
Likes: 0
From: New Hampshire

Recently I've been noticing a srange smell, like burning plastic or rubber, coming from the vents when I have the heat on full blast for a while. I've noticed that if I turn it down, it goes away, but in the cold we've been having lately it'* hard to keep it turned down. Does anyone know what that could be?
Originally Posted by Sol
I smell that occationally as well, but never think twice about it until now. I would like to know what it is too.
It might be that your blower motor is overheating, especially if the smell goes away when you dial down its speed to something less than maximum. Can you check under the hood to see if its little rubber elbow cooling duct is in place? It'* supposed to redirect some cooling air out of the evaporator core and into the side of the blower motor housing to keep it cool.
Originally Posted by fantastic88
I hope this persons wrong, but they told me that it might be the smell of my plastic upper intake starting to melt getting into the ventalation system.
Burning plastic smell = burnt coolant, check the engine bay for any coolant dripping on hot manifolds or anything that could burn coolant.
You are NOT affected by the typ VIN K upper intake issues, because your upper intake is replaced with a supercharger
Any LG3 or LN3 (87-91 3800'*) DO NOT have plastic upper intakes, your manifolds are metal....imagine that
You are NOT affected by the typ VIN K upper intake issues, because your upper intake is replaced with a supercharger
Any LG3 or LN3 (87-91 3800'*) DO NOT have plastic upper intakes, your manifolds are metal....imagine that
Originally Posted by Jim W
Burning plastic smell = burnt coolant, check the engine bay for any coolant dripping on hot manifolds or anything that could burn coolant.
You are NOT affected by the typ VIN K upper intake issues, because your upper intake is replaced with a supercharger
Any LG3 or LN3 (87-91 3800'*) DO NOT have plastic upper intakes, your manifolds are metal....imagine that
You are NOT affected by the typ VIN K upper intake issues, because your upper intake is replaced with a supercharger
Any LG3 or LN3 (87-91 3800'*) DO NOT have plastic upper intakes, your manifolds are metal....imagine that

Thread Starter
Senior Member
Posts like a Corvette
Joined: May 2003
Posts: 1,305
Likes: 0
From: New Hampshire

Hmmm...all good ideas to consider...I have to get under the hood and see what I can see...I just needed a direction (and thanks to you guys I have that now
).
Thanks, and I'll let you know what it is.
).Thanks, and I'll let you know what it is.
Thread
Thread Starter
Forum
Replies
Last Post



