I'm south of 465, a few miles after the Harding St exit.

In my case I actually had to replace the bushings as well. Half of one was missing on the driver'* side. I was kinda waiting to wear the pads out before i did the brakes, but then the rotor pulsation and the low brake pedal was kinda concerning me.

going to attempt a new hood w/ functional ram air ram air and heat extractors, gxp tails, hid lows and fogs, center light up and a fresh coat of paint (thinking about a bold blue but we'll see) and new idea for my salad shooter im goin to have them fixed then turned from chrome to black chrome just want it to be one of a kind kinda hard to do ill have a twin soon enough.

other than apperance T.O.G. headers downpipe 3" cat rockers and springs and a 3.5" pulley
anyone have any other ideas for her

Flux Capacitor.LOL

It'* spring, what have you gotten done?

Regal is up and running.
Looking for motor to put in GTP
Determining parts to build up a transmission for Bonne.
Adding U joints in truck driveshaft.

I started taking out my engine yesterday. Just lacking a 34mm socket, but that shouldn't be too much of a problem.

Just got her and my plans for the spring/summer are:
-2.5 inch dual exhaust with twin tips on each side
-K&N or similar cold air or fender well intake
-Just installed my sony x-plod headunit
-Just installed my Rockford Fosgate sub
-Car came with JBL speakers
-Fix the scratches, then polish clay and wax
-Clear the turn singles
-Tent the taillights
-Paint the large dips in the rims white and the small ones black
-Paint the Calipers Blue
-Blue angle eyes in the lights
-Blue under hood accents
-Custom Sub box

And whatever else comes along..
Happy Modding!

yeah i just got a 93 bonneville from my dad hes moved onto a 97 grand prix gtp... ive already got the whole interior ripped out changing from bench to bucket seats wants to change the shifter from the steering wheel to the middle console also thinkin of a paint job purples not my colour, probably got a lot of work with everything else i wanna change out the exhaust for a stainless one or something or other not sure yet pretty hefty list

The exhaust should be stainless already. Do you have holes, or just surface rust? There are write-ups for almost everything you want to do, so good luck!

there are approximately 7 small holes 5 in the floor one in the rear passanger side wheel well and one in the trunk i have access to all kinds of tools and materials bein a millwright and all so I should be able to patch em up nice and easily as for the exhaust it doesnt look stainless i might just have to clean it up... do you know if most bonnevilles seats and what not are interchangable between years? also Id like to look into tweaking under the hood for more performance the cars a beast as it is but I know she can do better