Securing floormats
#1
Guest
Posts: n/a
Securing floormats
Anyone found a good way to secure aftermarket floormats? I bought a plain gray set (since the dealer didn't throw any in with my SLE), and the driver'* mat is sliding around a bit despite the plastic spikes on its bottom. The driver'* factory floormat in my old car (96 Dodge Avenger) had a hole in it, that attached to a small hook bolted to the floor. Any similar ideas for non-factory mats?
#3
Senior Member
True Car Nut
Join Date: Dec 2002
Location: Halifax, Canada 91SSE / 97SSEi
Posts: 5,857
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by MOS95B
The hook side of velcro?? Carpet tape?
I find the rear mats move around a lot more then the front ones.
My 91 had buttons to keep the two front floor mats from moving around.... too bad it didn't have it on the back two mats.
#5
Senior Member
Certified Car Nut
Join Date: Jul 2003
Location: Robbinsdale, MN
Posts: 15,408
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by SSE14U24ME
I don't hardly let anyone ride in my car.
Seriously, tho, if you're talking about the rear floor matts, the hook side of velcro should work. Stick it to the back of the matt, and it should grab the carpet. For the fronts, the best bet is time. They will eventually get used to the shape of the floor and be fine. (But the velcro couldn't hurt)
#6
Senior Member
True Car Nut
Join Date: Nov 2002
Location: Texarkana, Texas
Posts: 6,042
Likes: 0
Received 0 Likes
on
0 Posts
My drivers side floormat rotates clockwise, go figure, and all the other ones end up slinding as far back as they can.... No idea how that happens... But i've had Velcro on my list for almost a week, Getting my helmet fitted distracted me...
Thread
Thread Starter
Forum
Replies
Last Post