Project Blue has started. DAY 3 NOW WITH PICS!!!!!
Thread Starter
Senior Member
Posts like a Camaro
Joined: Jul 2004
Posts: 828
Likes: 0
From: Diberville Mississippi

today was day 1 of my build up of my Blue 92 bonneville SE....i smoked a rod bearing last year right after i fixed what started as a head gasket repair.
Transmission was also giving me hell...so a new one is in the trunk right now...
so list of mod/repairs over the next 5 days
Crankshaft kit with rods and mains
Transmission with 84000 miles on it.....the car currently has 200400 miles
Ball joints
HD Sway Bar links
i'm gonna try to do a home port on the exhaust manifolds
probably a new ac system
Today'* goal was to remove the Engine and trans unit..which was a pain LMAO. 2 morrow is probably just getting the crank in..and probably clean the **** outta the engine bay. and paint a few things ^_^
James
Transmission was also giving me hell...so a new one is in the trunk right now...
so list of mod/repairs over the next 5 days
Crankshaft kit with rods and mains
Transmission with 84000 miles on it.....the car currently has 200400 miles
Ball joints
HD Sway Bar links
i'm gonna try to do a home port on the exhaust manifolds
probably a new ac system
Today'* goal was to remove the Engine and trans unit..which was a pain LMAO. 2 morrow is probably just getting the crank in..and probably clean the **** outta the engine bay. and paint a few things ^_^
James
Thread Starter
Senior Member
Posts like a Camaro
Joined: Jul 2004
Posts: 828
Likes: 0
From: Diberville Mississippi

Well not much progress today.we did manage to get the harmonic balancer off and the water pump...which is bad. broke a stud off in the timing cover....last one holding it on..and the magnet for the camsensor is busted...fun fun. Tranny mount is toast too...lol.
Bonnevilles suck arse
This car is gonna kick when its done
James
Bonnevilles suck arse
This car is gonna kick when its done
James
Thread Starter
Senior Member
Posts like a Camaro
Joined: Jul 2004
Posts: 828
Likes: 0
From: Diberville Mississippi

taking a break so i'm gonna show some pics... Crank is out...just gotta clean everything to begin putting it back together...
2 rear-most rod bearings were shot. Also found a buttload of metal in the pan and on the pump screen.
Here are some pics






Gotta get back 2 work
James
2 rear-most rod bearings were shot. Also found a buttload of metal in the pan and on the pump screen.
Here are some pics






Gotta get back 2 work
James
Originally Posted by BonnevilleSEman
Originally Posted by willwren
You numbered your rod caps, right?
James


