Prepping the O.R.
#1
DINOSAURUS BOOSTUS
Expert Gearhead
Thread Starter
Prepping the O.R.
Pics to come.
Patient is getting brought in around 8-9pm via slow moving ambulance with yellow strobe lights.
The donor organs have already arrived and are sitting in water being prepped for transplant.
All necessary supplies have also been brought into the operating room.
Bout to go lay out the surgeon'* instruments to work with.
Patient is getting brought in around 8-9pm via slow moving ambulance with yellow strobe lights.
The donor organs have already arrived and are sitting in water being prepped for transplant.
All necessary supplies have also been brought into the operating room.
Bout to go lay out the surgeon'* instruments to work with.
#4
Senior Member
True Car Nut
Join Date: May 2005
Location: _Phoenix, AZ_ _WCBF '05, '06, '07 Survivor_ ____NEBF '07 Remnant___
Posts: 3,448
Likes: 0
Received 6 Likes
on
6 Posts
Dr. Boost to surgery....Dr. Boost to surgery
LOL @ Boosty....I think A.J. lost an upper, but I get the intake mani'* all mixed up
LOL @ Boosty....I think A.J. lost an upper, but I get the intake mani'* all mixed up
#6
DINOSAURUS BOOSTUS
Expert Gearhead
Thread Starter
The patient seems to have ingested a couple gallons of water. Currently we are cleaning the breathing passages of fluid.
Pics happening..including the two hidden bolts.
Pics happening..including the two hidden bolts.
#7
Senior Member
Certified GM nut
Join Date: Sep 2005
Location: Home Sweet Home in New York
Posts: 2,009
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by BillBoost37
The patient seems to have ingested a couple gallons of water. Currently we are cleaning the breathing passages of fluid.
Pics happening..including the two hidden bolts.
Pics happening..including the two hidden bolts.
#8
DINOSAURUS BOOSTUS
Expert Gearhead
Thread Starter
The parts are pretty much cleaned up. Ready to go back together..I pulled the injectors..cleaned the tips for the new o rings and er uh..HEY.. they gave me the wrong ones.
We pulled the t stat bolts..??? need a new gasket... don't have one. Might make a temp since we need to run the car for a while w/the rad sealant.
We pulled the t stat bolts..??? need a new gasket... don't have one. Might make a temp since we need to run the car for a while w/the rad sealant.
#9
Senior Member
Certified GM nut
Join Date: Sep 2005
Location: Home Sweet Home in New York
Posts: 2,009
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by BillBoost37
The parts are pretty much cleaned up. Ready to go back together..I pulled the injectors..cleaned the tips for the new o rings and er uh..HEY.. they gave me the wrong ones.
We pulled the t stat bolts..??? need a new gasket... don't have one. Might make a temp since we need to run the car for a while w/the rad sealant.
We pulled the t stat bolts..??? need a new gasket... don't have one. Might make a temp since we need to run the car for a while w/the rad sealant.
#10
DINOSAURUS BOOSTUS
Expert Gearhead
Thread Starter
Originally Posted by Mortehl
Gasket maker maybe?
That is the worst to get back off...any gasket like material will work..doesn't really matter though. As I said..we don't have injector o rings either. IT'* a little tough to run the car that way.
Hey Morty...there'* this one bolt that will not come off...no way to get to it...we can't do it. We tried everything.
(I bet you are going to tell us that others have done it before aren't ya?)....
We got all the bolts...all the goodies... although the coolant elbow of course snapped off in the intake and accessory bracket. Was quite the challenge to get out.