obd2 scan gauge, better than a pillar pod?
Thread Starter
Senior Member
True Car Nut
Joined: Jun 2003
Posts: 6,313
Likes: 2
From: Purgatory
obd2 scan gauge, better than a pillar pod?
The Interceptor is a 2 1/16" gauge that reads, displays, and records any two of
up to 28* important engine operating parameters. These parameters are
typically accessed via a scan tool. Scan tools plug into the OBD2 port
(diagnostic port located under the dash) and display critical data necessary for
performance tuning and problem diagnosis. The Interceptor also reads and
clears DTC'* (Diagnostic Trouble Codes).
up to 28* important engine operating parameters. These parameters are
typically accessed via a scan tool. Scan tools plug into the OBD2 port
(diagnostic port located under the dash) and display critical data necessary for
performance tuning and problem diagnosis. The Interceptor also reads and
clears DTC'* (Diagnostic Trouble Codes).
slow site www.aeroforcetech.com
Any intrest in a group buy for black/orange combo?
Senior Member
True Car Nut
Joined: Sep 2004
Posts: 6,837
Likes: 3
From: Fitchburg Ma _ToastedRice_
Coming in May - red/black displays for you Pontiac fans
Check back in the upcoming weeks for pictures
Check back in the upcoming weeks for pictures
Senior Member
True Car Nut
Joined: Sep 2004
Posts: 9,130
Likes: 0
From: Farmington, Minnesota =MWBF '05 SURVIVOR= =CEBF '06 SURVIVOR= =August '06 COTM=
Only for OBD II???? BOOO!!!!!!!!
I have a piullar pod that would be awesome looking in....Unless I read the site wrong or something and they have it for my OBD 1.5 Bastard child? I'm in if it will work for 95 SSEi...No collor preferance....Plus with this I wouldn't need a trans temp gauge...
I have a piullar pod that would be awesome looking in....Unless I read the site wrong or something and they have it for my OBD 1.5 Bastard child? I'm in if it will work for 95 SSEi...No collor preferance....Plus with this I wouldn't need a trans temp gauge...
Senior Member
Posts like a Corvette
Joined: Jan 2003
Posts: 1,250
Likes: 0
Re: obd2 scan gauge, better than a pillar pod?
Originally Posted by PontiacDad
The Interceptor is a 2 1/16" gauge that reads, displays, and records any two of
up to 28* important engine operating parameters. These parameters are
typically accessed via a scan tool. Scan tools plug into the OBD2 port
(diagnostic port located under the dash) and display critical data necessary for
performance tuning and problem diagnosis. The Interceptor also reads and
clears DTC'* (Diagnostic Trouble Codes).
up to 28* important engine operating parameters. These parameters are
typically accessed via a scan tool. Scan tools plug into the OBD2 port
(diagnostic port located under the dash) and display critical data necessary for
performance tuning and problem diagnosis. The Interceptor also reads and
clears DTC'* (Diagnostic Trouble Codes).
slow site www.aeroforcetech.com
Any intrest in a group buy for black/orange combo?
They wont have menu'* or storeing features, but they will read the data from OBD
Senior Member
Posts like a Corvette
Joined: Jan 2003
Posts: 1,250
Likes: 0
Originally Posted by LakevilleSSEi
Only for OBD II???? BOOO!!!!!!!!
I have a piullar pod that would be awesome looking in....Unless I read the site wrong or something and they have it for my OBD 1.5 Bastard child? I'm in if it will work for 95 SSEi...No collor preferance....Plus with this I wouldn't need a trans temp gauge...
I have a piullar pod that would be awesome looking in....Unless I read the site wrong or something and they have it for my OBD 1.5 Bastard child? I'm in if it will work for 95 SSEi...No collor preferance....Plus with this I wouldn't need a trans temp gauge...
But see above... gimme a month or so and ill see if i can whip up anything.