LIM gasket change
#12
Senior Member
Posts like a Northstar
Thread Starter
Join Date: Jul 2006
Location: Meridian, ID
Posts: 508
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by bill buttermore
I like the "Dexcoolectomy" in your sig pic
#13
Member
Posts like a V-Tak
Join Date: Feb 2007
Location: salisbury ma.
Posts: 56
Likes: 0
Received 0 Likes
on
0 Posts
when i do a lower intake on a 3800. i drain the coolant first. go through the top end inspect the upper intake for melting, cracks or warping , clean surface , view for any parts of old gasket and or silicone that got buy the rags , then what i do is i take at least 2 quarts of oil and give it an oil bath to pass any unwanted coolant out of the rest of the block. put it all back together , a little trans gel on the injector 0 rings. drain the oil to a slow drip. fill oil and coolant.start it up, and bleed the air out of the system. always making sure the fans come on is a must.....
Thread
Thread Starter
Forum
Replies
Last Post