1. Is there a gasket or O-ring on the lower intake manifold behind the 2 yellow O-Rings? Looks like there could be but I don't have one in my ZZP gasket kit.

2. Is there gasket between the N* TB and the adapter plate? There is a built in gasket in the TB but wasn't sure.

3. HOW THE HELL DO I GET MY ALTERNATOR APART? I can see how it should come apart but it is being a pain in the ***.

4. Anyone know the various sizes for the vacuum lines. GM wants a little much or them and discontinued some of them.

Thanks

-Lee

what are you drivin? I may be able to help if I knew.'
You could add your ride details (Year Make Model Trim) to your signature. Just click on UserCp at top of page then click "Edit Signature" Then we all know what vehicle you need help with.

he'* asking a general question about the L67. It'* not vehicle specific.

I didn't put an extra asket in because there is one on the TB but I did put one between the adapter and SC

I made my own vaccuum lines from the generic kit at autozone and made connectors out of flexible rubber tubing

Crunkfunk, thats what I was thinking as well on the TB, will have to look in to that vacuum thing still.

The is a 89 lesabre t-type that is getting a 98 L67 from a PA

Lee.. I have answers for ya.. about to hit the road. Will probably call ya.

Meanwhile Photobucket
BillBoost37
Boosted

Everything you are gonna need is in there under
Build up Misc
Intercooler plan

Literally.. lol

Maybe I should just start contacting you first bill, you always seem to jump in an answer it all anyway. thanks again I'll check it out now.

Well Lee.. I've been there and done that.

Swapped engines
Topswapped engines
L67 swaps
Cam swaps
Head swaps
Full trans rebuild with all seals, clutches, bushings etc.
Oil pan swaps (to newer)
Installed every brand of headers on the market
Fuel line upgrades
etc etc.

Right now there'* an MP112 GP that I'm finishing up, sitting in my driveway. I think I've done nearly everything H and W body related over the last 5 years. My buddy the mechanic calls me to diagnose 3800 cars when he gets them.

Has anyone else had a problem with the N* throttle bracket? I had to jam the piece on the end of the cable into the plastic piece on the TB and the plastic piece even hit the ZZP N* bracket, I had to make it shorter so the cables would reach and trim the bottom so I could get to past 40% throttle

Crunk...been there, done it a bunch of times w/o a problem. Please start a fresh thread as it'lll help folks in the future when they go to do it. Toss a couple pics in and I'll shoot stuff of how I do it.