so thru my travles i have acquired a few different key fobs, and talking to Mr keyless entry (Don) we both have learned a thing or 2 about the keyless entry systems in the Bonnevilles

in the early years of the Bonneville 90-91 GM used a 103T or a 104T transmitter
this Transmitter had Plastic buttons

from the years 92-95 GM used either a 302T or a 303T transmitter for the Bonnevilles
this trans mitter had rubber buttons (which suck)

my GOAL was to change my Pontiac 303T to the plastic buttons

so i came across a Buick regal with the key Fob on the junkyard....i comapared this to a 303T Transmiitter that i had found from a Park Avenue......

here is the 104 on the left, and the 303 on the right










104 on the bottom 303 on the top


now here you can see the difference in the buttons


the only modification to the Pad that is needed to adapt the newer buttons. you need to cut out the pad so it will clear the screw hole in the Fob


assembled and ready to go


now i went out to the car to test....OMFG the plastic buttons are SOOOOO much better than the orignal rubber, you can feel the actuall click as apposed to the soft mush feel....

i recommend if you can find a key fob with the plastic buttons you make the swap

That'* a good idea. You're right, the rubber buttons make it feel a lot cheaper. You're not always sure if your pushed the button correctly for it to do anything.

I can feel the click on my FOB, FTW.

just yesterday i got one from a early sabre will it work for my new sabre i dont know the year of the sabre but it had the remote that you can feel the clicks...i like the look better than my 97 remote can i just put batts in it and get it to work?

shame thanks for that info 302T so its not going to work what ones WILL work

If I buy the correct key fob will my bonnie recognize it or is there more to it? Because I'm reading my 1990 brochure and I see remote keyless entry was an option back then.

you MUST have the AU0 option code on your RPO sticker that is found in your trunk

with out that its not going to work

*Get'* a pen and paper*

*writes down AU0 option code and RPO sticker in trunk*

Thanks!

any one know what ones will work with my car?