Intake Plenum Assembly Meltdown-- Information Needed
#21
Junior Member
Posts like a V-Tak
Thread Starter
Resolution
For better or worse, I have decided to do what most people do-- buy a new EGR valve. There are too many factors to control, especially since the car has an undocumented history, to spend more time experimenting with a used, questionable valve.
I went with this product--
https://www.rockauto.com/en/moreinfo...choice=0-0-1-1
Thanks for all the helpful discussion-- that helped me decide what do do.
I went with this product--
https://www.rockauto.com/en/moreinfo...choice=0-0-1-1
Thanks for all the helpful discussion-- that helped me decide what do do.
The following users liked this post:
CathedralCub (02-18-2024)
#22
Senior Member
True Car Nut
That'* cool. I've heard good about Standard. Haven't used them myself. Curious how yours goes in say a year or two.
The following users liked this post:
alphaa10 (02-20-2024)
#23
Retired
We had a guy here years ago make an EGR stove pipe to prevent intake from melting. THIS was the only work around besides deleting and blocking off your EGR.
__________________
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel
The following users liked this post:
CathedralCub (02-27-2024)
#24
Senior Member
True Car Nut
I believe it. It was a bad decision to push hot exhaust gases through plastic. Very bad.
#25
Retired
Too bad I didn't still have my 95. I could take it out and measure it.
__________________
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel
The following users liked this post:
CathedralCub (02-28-2024)
Thread
Thread Starter
Forum
Replies
Last Post