Installing Aeroforce gauge....have question.
#1
Senior Member
Posts like a Turbo
Thread Starter
Join Date: May 2005
Location: Stockton, CA
Posts: 251
Likes: 0
Received 0 Likes
on
0 Posts
Installing Aeroforce gauge....have question.
I have the vent assy out of the car and I'm trying to take the moulding off.....the write up says it should pop right off but it seems to be hanging up on the bottom by the light/dim assy. Does that need to come out first? If so, how does it come out? I don't want to crack the plastic and it starting to make the cracking sound when I try to force it, so something isn't right......
#2
Senior Member
True Car Nut
Join Date: Jun 2003
Location: Purgatory
Posts: 6,313
Likes: 0
Received 0 Likes
on
0 Posts
Yes remove the light switch first.
http://www.bonnevilleclub.com/forum/...ight=aeroforce
you can see in the second pic the mounting tabs for the switch assembly.
http://www.bonnevilleclub.com/forum/...ight=aeroforce
you can see in the second pic the mounting tabs for the switch assembly.
#7
Senior Member
Posts like a Turbo
Thread Starter
Join Date: May 2005
Location: Stockton, CA
Posts: 251
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by harofreak00
Originally Posted by PontiacDad
Right on, glad you enjoy it.
Did you go top hole or bottom, just curious?
Did you go top hole or bottom, just curious?
Went for an extended drive last night and still just can't get enough of it
#8
Originally Posted by hvactech
Originally Posted by harofreak00
Originally Posted by PontiacDad
Right on, glad you enjoy it.
Did you go top hole or bottom, just curious?
Did you go top hole or bottom, just curious?
Went for an extended drive last night and still just can't get enough of it