bill didnt answer his phone tonight, even though we had arrangements

im looking for pics of the heat pads installed on the seat without the leather covers... placement basically

having a hard idea getting a feel for how these AL7 elements should go into the 00+ seats :?

bill returned my call, and i got a better idea.. but pics would stil be great

Yup...sorry...I was working on pulling the 6.0L motor out of a Chevy 3500 Dually...

Motors still in it..but ready to leap out. At 2am we called it a night.... and I called Andrew.

Not sure if it helps, but placement is pretty much a matter of trying to fit all the heating elements in...if you do that, it should cover the whole seat.

I never took my leather off to do it. Snuck it under wherever possible.

(Yeah...he was upset I called...he was snuggling with his kitty... )

I don't have a photograph (nor heated seats) but perhaps this will help you.

http://pg.photos.yahoo.com/ph/archon...e2.jpg&.src=ph

yes it does... and it makes me do this

thanks though.. serious modifications are in place

Y do you thing this.....keep in mind that is the factory heated seats.......Being that the 00+ seats resemble the Caddy seats it should be pretty simple

the heating elements that bill gave me do not match the shape of the ones shown in that pic above...

i did use them however and have the bottom of the passenger seat cover on... it looks not right though... :*

ill get pics up in a few

this is with the heated seats in place... and when they are in there, there is no way for the velco to stick to the cushion.. it its all loose... and i dont understand why the leather isnt tight on the front part... all the clips are on...

I noticed when putting the leather back on mine you needed to move it around a bit. Push on it a few times and ti starts to mould itself back to shape.

In my case most of my velcro isn't holding, however the seats look correct w/o it. Probably because they had it for many years.