Grille Question
Senior Member
Posts like a Camaro
Joined: Apr 2005
Posts: 1,121
Likes: 0
From: Niagara Falls Ontario Canada

http://www.bonnevilleclub.com/forum/...ic.php?t=65687
Here'* what silver chrome painted grilles on white look like!
Here'* what silver chrome painted grilles on white look like!
Originally Posted by SapphireTorrent
I need to do this myself. Except my inserts are broken in several spots, anyone know how much they are?
did you check out GMPartsdirect.com
Originally Posted by Gumball
Originally Posted by SapphireTorrent
I need to do this myself. Except my inserts are broken in several spots, anyone know how much they are?
did you check out GMPartsdirect.com
Yeah, but I can't seem to find just the grill inserts. Though it would be nice to replace the whole front bumper, I don't wanna go through that expense just now.
it seems like they would probally give them to you at a junk yard.
IMO I would put a grille like Gumball'* or mine in. It stands out alot more and is shinny so you can see it from a far.
IMO I would put a grille like Gumball'* or mine in. It stands out alot more and is shinny so you can see it from a far.
Junior Member
Joined: Aug 2005
Posts: 1
Likes: 0
From: North of Buffalo, NY *** NEBF '05, '06, '07 *** ***ONBF & NYBF 06; 07*** ***WCBF 06***

I think Silverbullet looked up the price from GM....something rediculous like $50. Below is copied from my post back in June.
I went with silver on mine... and they are pretty bright! Be sure to chose a paint that will adhere to plastics, and chip resistant. I painted mine back in May... 400 miles each week and no chips whatsoever.
Recognize these? Okay…so they’re upside down…

They come out very easy…if you do it the right way… with the hood open, gently push up on the plastic front piece while pushing out the grill part. There’* two little tabs, one on each side. Be sure to push the grill OUT away from the engine bay…

There are three tabs on the bottom….

During:

Before

After:



I went with silver on mine... and they are pretty bright! Be sure to chose a paint that will adhere to plastics, and chip resistant. I painted mine back in May... 400 miles each week and no chips whatsoever.
Recognize these? Okay…so they’re upside down…

They come out very easy…if you do it the right way… with the hood open, gently push up on the plastic front piece while pushing out the grill part. There’* two little tabs, one on each side. Be sure to push the grill OUT away from the engine bay…

There are three tabs on the bottom….

During:

Before

After:



Originally Posted by singscountry1967
They come out very easy…if you do it the right way…
HA !! should have seen the look on Tracy'* face when I did it to her car at an NEBF
please dont hurt my car Jim.
Nice photo "how to" Sings
Wow! That does look pretty easy and makes a big difference IMO. And $50 bucks from GM? Well, I guess I'll head to some junk yards instead. How they can justify $50 bucks for that is beyond me.


