engine cover
Senior Member
Certified GM nut
Joined: Jun 2004
Posts: 1,719
Likes: 0
From: Grand Haven, Michigan
Originally Posted by opensourceguy
Yeah, mine is awesome too. Wouldn't want another no matter. I'm still one for the vintage parts of the world.
-justin
-justin
Just kidding Justin. I couldn't help it lol.
Senior Member 8-16-02
Posts like a Northstar
Joined: Aug 2002
Posts: 529
Likes: 0
Senior Member
Certified Car Nut
Joined: Aug 2004
Posts: 11,269
Likes: 0
From: My reclining computer chair
I looked at that.
Too bad the co I used to work for went out of business. They had a laser burn table that I could have cut mine with. Might call the guy I used to work with and see if they still got the table
Too bad the co I used to work for went out of business. They had a laser burn table that I could have cut mine with. Might call the guy I used to work with and see if they still got the table
Member
Posts like a V-Tak
Joined: Mar 2006
Posts: 30
Likes: 0
dude, that covers hideous...stick with stock, or, if your daring like me and enjoy a little more engine noise, just leave your cover off...one thing im going to do soon is replace all the bearings along with porting/polishing my supercharger, and while im at it im going to paint the supercharger black with a ceramic based paint...should be kickass...but ditch that cover...
Senior Member
Posts like a Corvette
Joined: Mar 2006
Posts: 1,356
Likes: 0
no, it will not work
my brother had a S2 monte carlo with that same engine cover, and before he got rid of it last month and switched to the supercharged '04 monte ss, I took his engine cover off.
Ours is like with the tab in back, theirs has a pin on the cover (or a plastic dowel, whatever) that goes into a hole on a sheet metal pressed mount.
Unless you can change the mounts, it won't be cross-compatible
my brother had a S2 monte carlo with that same engine cover, and before he got rid of it last month and switched to the supercharged '04 monte ss, I took his engine cover off.
Ours is like with the tab in back, theirs has a pin on the cover (or a plastic dowel, whatever) that goes into a hole on a sheet metal pressed mount.
Unless you can change the mounts, it won't be cross-compatible
Senior Member
Posts like a Corvette
Joined: Mar 2006
Posts: 1,356
Likes: 0
Re: engine cover
Originally Posted by L27Buick
im sure its been asked before and i searched but i dont like my engine cover and i was wondering if one off a grand prix would work? like this one
what would i have to do to make one from a grand prix fit?
what would i have to do to make one from a grand prix fit?
or was.. til he got the '04
http://www.sounddomain.com/ride/626261/2
this is pretty weird of a coincidence
Thread
Thread Starter
Forum
Replies
Last Post